Cisco Systems 1400 manual Web Browser Interface, Browser Http Interface

Page 68

Chapter 6 Troubleshooting

Reloading the Bridge Image

Step 2 Make sure the PC contains the bridge image file (c1410-k9w7-tar.122-13.JA.tar) in the TFTP server folder and the TFTP server is activated. For additional information, refer to the “Obtaining the Bridge Image File” and “Obtaining the TFTP Server Software” sections.

Step 3 Connect the PC to the bridge using a Category 5 Ethernet cable.

Step 4 Disconnect the power jack from the power injector.

Step 5 Press and hold the MODE button while you reconnect power to the power injector.

Step 6 Hold the MODE button until the status LED turns red (approximately 20 to 30 seconds).

Step 7 Wait until the bridge reboots as indicated by all LEDs turning green followed by the Status LED blinking green.

Step 8 After the bridge reboots, you must reconfigure the bridge by using the Web interface, the Telnet interface, or IOS commands.

Note The bridge is configured with the factory default values including the IP address (set to receive an IP address using DHCP). To obtain the bridge’s new IP address, refer to the “Using the IP Setup Utility” section on page 5-9.

Web Browser Interface

You can also use the Web browser interface to reload the bridge image file. The Web browser interface supports loading the image file using HTTP or TFTP interfaces.

Note Your bridge configuration is not changed when using the browser to reload the image file.

Browser HTTP Interface

The HTTP interface enables you to browse to the bridge image file on your PC and download the image to the bridge. Follow the instructions below to use the HTTP interface:

Step 1 Open your Internet browser. You must use Microsoft Internet Explorer (version 5.x or later) or Netscape Navigator (version 4.x).

Step 2 Enter the bridge’s IP address in the browser address line and press Enter. An Enter Network Password screen appears.

Step 3 Enter your username in the User Name field.

Step 4 Enter the bridge password in the Password field and press Enter. The Summary Status page appears. Step 5 Click the System Software tab and then click Software Upgrade. The HTTP Upgrade screen appears. Step 6 Click Browse to locate the image file on your PC.

Step 7 Click Upload.

For additional information, click the Help icon on the Software Upgrade screen.

Cisco Aironet 1400 Series Wireless Bridge Hardware Installation Guide. OL-4072-03

6-10

OL-4072-04

 

 

Page 67 Page 69
Image 68
Page 67 Page 69
Contents Corporate Headquarters Text Part Number OL-4072-04Cisco Systems, Inc. All rights reserved N T E N T S IiiStacking Bridges Using Ipsu to Set the Bridge’s IP Address and Ssid Overview D-2 Preface ObjectivesAudience OrganizationConventions ViiiRelated Publications Product Documentation DVD Obtaining DocumentationCisco.com Reporting Security Problems in Cisco Products Documentation FeedbackCisco Product Security Overview Ordering DocumentationProduct Alerts and Field Notices Obtaining Technical AssistanceCisco Technical Support & Documentation Website XiiSubmitting a Service Request XiiiXiv Definitions of Service Request SeverityObtaining Additional Publications and Information Preface Obtaining Additional Publications and Information Xvi Overview Key Features Bridge ConfigurationsPower External AntennaMetal Enclosure Integrated AntennaEthernet Ports Bridge Connectors and LEDs Bridge LEDsPoint-to-Point Configuration Network Configuration ExamplesReceive Signal Strength Indicator Port Port Aggregation or Redundancy Configuration Point-to-Multipoint ConfigurationBridge Specifications Category Bridge Power Injector and Power ModuleCofdm Maximum Power Levels Installation Overview 120 VAC, 15A U.S VAC, 10A International Safety Precautions Safety InformationFCC Safety Compliance Statement Typical Bridge Installation Components Cables Ground See noteUnpacking the Bridge Installation GuidelinesSite Surveys Before Beginning the Installation Package ContentsBridge Layout and Connectors VDC power output cable AC power cord Power module Installation Summary Installation Overview Installation Summary Mounting and Alignment Overview Multi-function Mount Mounting the BridgeMounting Hardware Bridge LEDs Mast Type Mast Diameter Mast Attachment MethodInstall LED State Bridge State LED and Connector LocationsAligning the Antenna Using LED Indications Signal Level dBm Ethernet LED Status LED Radio LEDAligning the Antenna Using the Rssi Voltage Rssi Reading voltsStacking Bridges Choosing a Second Mounting Location Installing the Stacked BridgesOverview Verifying Isolation Stacking Bridges Verifying Isolation Configuring the Bridge for the First Time Resetting the Bridge to Default Settings Before You StartConnecting to the Bridge Locally Obtaining and Assigning an IP AddressAssigning Basic Settings Summary Status OL-4072-04 Page Default Settings on the Express Setup Output Power LevelSetting Default What To Do NextObtaining and Installing Ipsu Using the IP Setup UtilityProtecting Your Wireless LAN Using Ipsu to Find the Bridge’s IP Address Click Get IP AddressUsing Ipsu to Set the Bridge’s IP Address and Ssid Ipsu Set Parameters ScreenCommand Purpose Assigning an IP Address Using the CLIUsing a Telnet Session to Access the CLI Troubleshooting Ethernet Status Radio Meaning Bridge Normal Mode LED IndicationsChecking the Bridge LEDs LED Digit Description Power Injector LEDsBlinking Codes First Second Power Injector LEDs Injector StatusChecking Power Checking Basic Configuration Settings Security SettingsAntenna Alignment Resetting to the Default ConfigurationUsing the Mode Button Using the Web Browser Interface Reloading the Bridge ImageWeb Browser Interface Browser Http InterfaceObtaining the Bridge Image File Browser Tftp InterfaceObtaining the Tftp Server Software Http//tftpd32.jounin.netTranslated Safety Warnings Appendix a Translated Safety Warnings Installation Warning Installation and Grounding Warning Page Circuit Breaker Warning Ground Conductor Warning OL-4072-04 Installation Warning Lightning Activity Warning Explosive Device Proximity Warning Radio Frequency Exposure LimitsEen dergelijk gebruik te voldoen Und bestimmtRestricted Area Warning Page OL-4072-04 Declarations of Conformity and Regulatory Information For Home or Office USE Industry Canada International ModelsCanadian Compliance Statement Cisco Part Number Model GainEuropean Community Ireland Declaration of Conformity for RF Exposure Administrative Rules for Cisco Aironet Bridges in Taiwan Chinese Translation English TranslationOperation of Cisco Aironet Bridges in Brazil Bridge ModelPortuguese Translation Channels and Maximum Power Levels OL-4072-04 Assembling the Rooftop or Wall Mount Package Contents Unpacking the MountAssembling the Mount Repeat Steps 8 and 9 for the other square holeOL-4072-04 O S S a R Y GL-1GL-2 GL-3 OfdmGL-4 Computing device with an installed client adapter GL-5GL-6 D E IN-1IN-2

1400 specifications

Cisco Systems 1400, known for its robust networking solutions, is a versatile and powerful device designed to enhance connectivity in various environments. The Cisco 1400 is part of the Cisco Industrial Router series and is tailored specifically for industrial applications, particularly in challenging environments where durability and reliability are paramount.

One of the main features of the Cisco 1400 is its rugged construction. It is built to withstand extreme temperatures, vibrations, and dust, making it ideal for deployment in factories, oil and gas rigs, and outdoor installations. This ruggedness ensures operational continuity in situations where standard networking equipment might fail.

Connectivity is another primary characteristic of the Cisco 1400. It supports a variety of WAN and LAN interfaces, including Serial, Ethernet, and cellular connections. This multifunctionality allows for flexible network design, enabling organizations to integrate the device into existing infrastructure seamlessly. Furthermore, it facilitates remote access, making it suitable for managing distributed networks in real-time.

The Cisco 1400 integrates advanced security features to safeguard data and network integrity. With support for VPN, firewall, and intrusion prevention systems, it provides a secure platform for critical communications. The device is also compliant with various industry standards and regulatory requirements, ensuring that organizations can maintain robust security postures in line with compliance mandates.

Another notable technology featured in the Cisco 1400 is its support for Cisco’s IoT capabilities. It can connect and manage numerous IoT devices, providing enhanced monitoring and data collection critical for industrial applications. This feature supports the concept of Industry 4.0, allowing businesses to leverage data analytics for predictive maintenance and operational efficiency.

Management and configuration of the Cisco 1400 are simplified through the use of Cisco Prime Infrastructure and Cisco DNA Center. These management tools provide intuitive dashboards and automated processes, streamlining network operations.

In summary, the Cisco Systems 1400 is a powerful, rugged networking solution designed for industrial applications. With its versatile connectivity options, robust security features, support for IoT technologies, and simplified management capabilities, it stands out as an exceptional choice for organizations looking to enhance their network infrastructure in challenging environments. This makes the Cisco 1400 an ideal solution for modern industrial connectivity needs.
Top Page Image Contents