Note
••When your home theater and TV are connected through HDMI ARC, an audio connection is not required (see 'Option 1: Connect to TV through HDMI (ARC)' on page 23).
Option 1: Connect audio through a digital optical cable
Best quality audio
TV |
1 Using an optical cable, connect the OPTICAL connector on your home theater to the OPTICAL OUT connector on the TV or other device.
•The digital optical connector might be labeled SPDIF or SPDIF OUT.
Option 2: Connect audio through a digital coaxial cable
Good quality audio
1 Using a coaxial cable, connect the COAXIAL connector on your home theater to the COAXIAL/DIGITAL OUT connector on the TV or other device.
•The digital coaxial connector might be labeled DIGITAL AUDIO OUT.
Option 3: Connect audio through |
|
| |
analog audio cables | is h | ||
Basic quality audio | E n g l | ||
| |||
1 | Using an analog cable, connect the AUX |
| |
connectors on your home theater to the AUDIO OUT connectors on the TV or other device.
VCR |
Set up speakers
Set up the speakers manually to experience customized surround sound.
Before you start
Make the necessary connections described in the quick start guide, and then switch the TV to the correct source for your home theater.
1 Press
(Home).
2 Select [Setup], and then press OK.
3 Select [Audio] > [Speaker Setup].
4 Enter the distance for each speaker, and then listen to the test tones and change the volume. Experiment with the speaker positions to find the ideal setting.
Set up EasyLink (HDMI-CEC control)
This home theater supports Philips EasyLink, which uses the
EN 25