Enable EasyLink, EasyLink controls | Philips HTB5544D instruction

•

compliant devices that are connected through HDMI can be controlled by a single remote control.

Note

••Depending on the manufacturer, HDMI-CEC is known by many names. For information on your device, see the user manual of the device.

••Philips does not guarantee 100% interoperability with all HDMI-CEC devices.

Before you start

•Connect your home theater to the HDMI- CEC compliant device through HDMI connection.

•Make the necessary connections described in the quick start guide, and then switch the TV to the correct source for your home theater.

Enable EasyLink

1 Press (Home).

2 Select [Setup], and then press OK.

3 Select [EasyLink] > [EasyLink] > [On] .

4 On your TV and other connected devices, turn on HDMI-CEC control. For details, see the user manual of the TV or other devices.

•On your TV, set the audio output to 'Amplifier' (instead of TV speakers). For details, see the TV user manual.

EasyLink controls

With EasyLink, you can control your home theater,TV, and other connected HDMI-CEC compliant devices with a single remote control.

•[One Touch Play] (One-touch play): When a video disc is in the disc compartment, press (Play) to wake up the TV from standby, and then play a disc.

•[One Touch Standby] (One-touch standby): If one-touch standby is enabled, your home theater can switch to standby

with the remote control of the TV or other HDMI-CEC devices.

•[System Audio Control] (System audio control): If system audio control is enabled, the audio of the connected device is output through your home theater speakers automatically when you play the device.

•[Audio Input Mapping] (Audio input mapping):If system audio control does not work, map the connected device to the correct audio input connector on your home theater. (see 'Set up the audio' on page 26)

Note

••To change the EasyLink control settings, press (Home), select [Setup] > [EasyLink].

Set up the audio

If you cannot hear the audio output of a connected device through your home theater speakers, do the following:

• Check that you have enabled EasyLink on all the devices, (see 'Set up EasyLink (HDMI-CEC control)' on page 25) and on your TV, set the audio output to "Amplifier" (instead of TV speakers). For details, see the TV user manual, and setup the EasyLink audio control.

Press (Home).

Select [Setup], and then press OK.

Select [EasyLink] > [System Audio

Control] > [On].

•To play the audio from the TV speakers, select [Off], and skip the following steps.

Select [EasyLink] > [Audio Input

Mapping].

Follow the onscreen instructions to map the connected device to the audio inputs on your home theater.

26EN