Installation and Power Supply Requirements
20mm x 5mm, 3.15AH,250V
If any problems are encountered with fuses continually blowing the following alternative ratings maybe used:
20mm x 5mm, 3.15AH,250V
20mm x 5mm, 6.3AH,250V
Caution — for continued protection against risk of fire, replace only with same type and rating of fuse.
NOTE: The rack should be professionally installed by a competent engineer. There are no operator serviceable parts inside the unit and it should only be opened by a qualified service engineer. The mains supply should be disconnected before removing the cover.