Cabletron Systems 9H532-17, 9H531-17 manual Reset Switch

Page 26

Installing the SmartSwitch 9000 Module

The Reset Switch

The Reset switch is located under the top plastic tab as shown in Figure 2-3.

Use the reset switch to reset the module’s processor, shutdown (power down) the module, and/or restart the module.

•To reset the module’s i960 processor, press the reset switch twice within three seconds.

•To shut down the module, press and hold the reset switch for three or more seconds.

•To restart the module, press the reset switch momentarily.

SNMP management may be used to disable this switch to enhance module security.

Reset Switch

Figure 2-3. The Reset Switch

2-8

Image 26

Contents 9033184-01 Page FCC Notice Cabletron SYSTEMS, INC Program License Agreement Iii Cabletron Systems Limited Program License Agreement Page Declaration of Conformity Contents Contents Features IntroductionIntroduction Auto-Negotiation Speed/Duplex Mode SmartTrunk Broadcast Suppression Switching Options Related Manuals Getting Help Your email addressInstalling an Hsim or Vhsim Unpacking the ModuleUser Accessible Components Prom Switch Function Description Using DIP Switch Installing the Module into the SmartSwitch 9000 Chassis Installing the 9H531-17 and 9H532-17 Modules Reset Switch Reset Switch100BASE-TX Network Cabling Requirements10BASE-T Network 100BASE-FX NetworkInstalling the SmartSwitch 9000 Module SmartSwitch Architecture Technical OverviewTechnical Overview SMB-10 Bus System Management BusesSMB-1 Bus INB Interface System Diagnostic ControllerDC/DC Converter I960 CoreLED Mode Switch Lanview LEDsLED Color State Description Functions of the INB transmit LED are listed in Table Ethernet Receive LEDs Speciﬁcations Technical SpeciﬁcationsPhysical ServiceRegulatory Compliance