Cabletron Systems 9A128-01 manual Rate, Interface Statistics Window

Page 30

The 9A128-01 Module View

management backplane; 100 Mbps for FDDI; or 155 Mbps for ATM). Load is further deﬁned by the following parameters.

In Octets	The number of bytes received by this interface, expressed
	as a percentage of the theoretical maximum load.
Out Octets	The number of bytes transmitted by this interface,
	expressed as a percentage of the theoretical maximum
	load.

Rate

The count for the selected statistic during the last poll interval. The available parameters are the same as those provided for Raw Counts. Refer to the Raw Counts section, above, for a complete description of each parameter.

Interface Statistics Window

The Interface Statistics window (Figure 2-9) provides MIB-II interface statistical information — including counts for both transmit and receive packets, and error and buffering information — for each available port interface. Color-coded pie charts also let you graphically view statistics for both received and transmitted Unicast, Non-Unicast, Discarded, and Error packets.

To open the Interface Statistics window:

1.In the I/F Summary window, click to select the interface for which you’d like to view more detailed statistics.

2.Click on . The appropriate Interface Statistics window, Figure 2-9, will appear.

Figure 2-9. Interface Statistics Window

Viewing Module Information

2-17

Image 30

Contents Cabletron Systems Virus Disclaimer Page Restricted Rights Notice Page Contents Chapter Fddi Management Chapter BridgingIndex Using This Guide IntroductionRelated Reading Device Name Software ConventionsCommon Window Fields IP AddressGetting Help Using ButtonsUsing On-line Help LocationGetting Help from the Cabletron Systems Global Call Center FTPFirmware Versions Supported 9A128-01 Module View Viewing Module Information Front Panel InformationUpTime Boot PromConnection Status Port StatusMenu Structure TimeDate A128-01 Module View Menu Structure Device MenuPort Status Menu Help Menu Fddi MenuUtilities Menu Board MenusPort Status Displays Port MenusSelecting a Port Status View Bridge Port Status DisplaysBridge Port Status Color Codes Bridge Port StateBridge Mapping Fddi Port Status DisplaysConnection State LER EstimateChassis Manager Window Fddi Port Status Color CodesViewing Hardware Types Device TypeModule Type Viewing I/F Summary Information Module Type WindowSta IndexDescription Interface Performance Statistics/Bar GraphsRaw Counts LoadRate Interface Statistics WindowUnicast ErrorAddress Non-UnicastTransmit Queue Size Transmit only Using the Find Source Address FeaturePackets Received Received only Packets Transmitted Transmit onlySetting the Device Date and Time Managing the HubEnabling and Disabling Ports Bridge PortsModule Ports Accessing the ATM Connections Window ATM ConﬁgurationATM Conﬁguration Connection DataSettings VPIConﬁguring Connections Adding a New ConnectionDeleting a Connection ATM Conﬁguration Conﬁguring Connections Fddi Management Conﬁguration Fddi ManagementMAC State SMT Version Req. Requested Target Token Rotation TimeNeg. Negotiated Number of MACs Concentrator M PortsConcentrator Non-M Ports MAC PathConnection Policy 15 32,768 a permanently set value for this bit Address Mode Station ListNumber of Nodes Topology Stations PanelNode Class Upstream NeighborPerformance Receive Frames Frame ErrorsTransmit Frames Lost FramesFddi Management Performance Bridging Bridge Status Window BridgingInterface Type Up TimeBridge State on Interface Bridge AddressConﬁguring Duplex Modes Enabling and Disabling Bridging Bridge Statistics Performance GraphsForwarded Green Xmitted Blue Total Errors RedFiltered Magenta Conﬁguring the Bridge Performance GraphsFiltered ErrorsForwarded XmittedInterface Statistics Window Forwarded toForwarded from Description Using Source Addressing Setting the Ageing Time Port Source Addresses WindowBridge Spanning Tree Conﬁguring the Bridge Spanning Tree Window Bridge PriorityRoot Port Root BridgeRoot Cost ProtocolMax Age Forwarding DelayHello Time Hold TimeChanging Bridge Spanning Tree Parameters Changing Bridge Priority Changing the Spanning Tree Algorithm Protocol TypeChanging Hello Time Changing Forwarding Delay Time Changing Max Age TimeChanging Port Priority Filtering Database Changing Path CostBridging Bridging Capacity ListNumber Ageing TimeConﬁguring the Filtering Database Receive PortPort Filtering Changing the Receive Port Altering the Ageing TimeChanging the Type of Entry Changing the Port Filtering ActionClearing All Permanent, Static, or Dynamic Entries Bridging Filtering Database Index Index-2 Index-3 Index Index-4