Cabletron Systems 9A128-01 manual ATM Conﬁguration, Connection Data

Page 37

ATM Conﬁguration

Due to a ﬁrmware anomaly, Connection Data will not be available in this window for the 9A128. Also, you will not be able to set any new connections or modify any existing connections from this window.

Figure 3-1. The Current ATM Connections Window

The Current ATM Connections window provides the following information about the device’s ATM connections:

Connection Data

The Connection Data ﬁelds provide the following information about each ATM interface available on the device:

I/F	Displays the index number assigned to each ATM
	interface present on the selected module. The 9A128-01
	has a single ATM interface, indexed 4.

The 9A128-01 supports a total of four interfaces. For more detailed information about the

TIP interfaces present on each module and their index number assignment, see Viewing I/F Summary Information in Chapter 2.

Maximum Connections Displays the maximum number of connections allowed by current device ﬁrmware.

Current Conﬁgured	Displays the number of Permanent Virtual Circuits, or
	PVCs, currently conﬁgured.

NOTE

Connection Data will not be available for the 9A128-01’s ATM interface.

3-2	Accessing the ATM Connections Window

Image 37

Contents Cabletron Systems Virus Disclaimer Page Restricted Rights Notice Page Contents Chapter Bridging Chapter Fddi ManagementIndex Introduction Using This GuideRelated Reading Common Window Fields Software ConventionsDevice Name IP AddressUsing On-line Help Using ButtonsGetting Help LocationFTP Getting Help from the Cabletron Systems Global Call CenterFirmware Versions Supported 9A128-01 Module View Front Panel Information Viewing Module InformationConnection Status Boot PromUpTime Port StatusTime Menu StructureDate Device Menu A128-01 Module View Menu StructurePort Status Menu Utilities Menu Fddi MenuHelp Menu Board MenusPort Menus Port Status DisplaysBridge Port Status Displays Selecting a Port Status ViewBridge Mapping Bridge Port StateBridge Port Status Color Codes Fddi Port Status DisplaysLER Estimate Connection StateFddi Port Status Color Codes Chassis Manager WindowDevice Type Viewing Hardware TypesModule Type Module Type Window Viewing I/F Summary InformationDescription IndexSta Interface Performance Statistics/Bar GraphsLoad Raw CountsInterface Statistics Window RateAddress ErrorUnicast Non-UnicastPackets Received Received only Using the Find Source Address FeatureTransmit Queue Size Transmit only Packets Transmitted Transmit onlyManaging the Hub Setting the Device Date and TimeBridge Ports Enabling and Disabling PortsModule Ports ATM Conﬁguration Accessing the ATM Connections WindowConnection Data ATM ConﬁgurationVPI SettingsAdding a New Connection Conﬁguring ConnectionsDeleting a Connection ATM Conﬁguration Conﬁguring Connections Fddi Management Fddi Management ConﬁgurationMAC State Req. Requested Target Token Rotation Time SMT VersionNeg. Negotiated Concentrator Non-M Ports Concentrator M PortsNumber of MACs MAC PathConnection Policy 15 32,768 a permanently set value for this bit Station List Address ModeNumber of Nodes Node Class Stations PanelTopology Upstream NeighborPerformance Transmit Frames Frame ErrorsReceive Frames Lost FramesFddi Management Performance Bridging Bridging Bridge Status WindowBridge State on Interface Up TimeInterface Type Bridge AddressConﬁguring Duplex Modes Enabling and Disabling Bridging Performance Graphs Bridge StatisticsForwarded Green Filtered Magenta Total Errors RedXmitted Blue Conﬁguring the Bridge Performance GraphsForwarded ErrorsFiltered XmittedForwarded to Interface Statistics WindowForwarded from Description Using Source Addressing Port Source Addresses Window Setting the Ageing TimeBridge Spanning Tree Bridge Priority Conﬁguring the Bridge Spanning Tree WindowRoot Cost Root BridgeRoot Port ProtocolHello Time Forwarding DelayMax Age Hold TimeChanging Bridge Spanning Tree Parameters Changing the Spanning Tree Algorithm Protocol Type Changing Bridge PriorityChanging Hello Time Changing Max Age Time Changing Forwarding Delay TimeChanging Port Priority Changing Path Cost Filtering DatabaseBridging Bridging Number ListCapacity Ageing TimeReceive Port Conﬁguring the Filtering DatabasePort Filtering Changing the Type of Entry Altering the Ageing TimeChanging the Receive Port Changing the Port Filtering ActionClearing All Permanent, Static, or Dynamic Entries Bridging Filtering Database Index Index-2 Index-3 Index Index-4