Cabletron Systems 9A128-01 manual Station List, Number of Nodes, Address Mode

Page 49

FDDI Management

Station List

The Station List illustrates the conﬁguration of the ring associated with the currently selected SMT entity, including number of nodes on the ring, node addresses (both Canonical and MAC), node class, and ring topology.

Figure 4-4. The Station List Window

The Station List provides the following information about the ring with which the SMT is currently associated:

Number of Nodes

The number of stations inserted into the FDDI ring with which the SMT entity is currently associated.

Address Mode

Displays the current mode being used to display the addresses of the devices in the Station List. The two possible modes are Canonical (FDDI) or MAC (Ethernet).

To change the current Address Mode, click on the Address Mode button at the bottom of the window. The current address mode will change in the Address Mode ﬁeld and the Stations panel.

4-8	Station List

Image 49

Contents Cabletron Systems Virus Disclaimer Page Restricted Rights Notice Page Contents Chapter Bridging Chapter Fddi ManagementIndex Introduction Using This GuideRelated Reading Common Window Fields Software ConventionsDevice Name IP AddressUsing On-line Help Using ButtonsGetting Help LocationFTP Getting Help from the Cabletron Systems Global Call CenterFirmware Versions Supported 9A128-01 Module View Front Panel Information Viewing Module InformationConnection Status Boot PromUpTime Port StatusTime Menu StructureDate Device Menu A128-01 Module View Menu StructurePort Status Menu Utilities Menu Fddi MenuHelp Menu Board MenusPort Menus Port Status DisplaysBridge Port Status Displays Selecting a Port Status ViewBridge Mapping Bridge Port StateBridge Port Status Color Codes Fddi Port Status DisplaysLER Estimate Connection StateFddi Port Status Color Codes Chassis Manager WindowDevice Type Viewing Hardware TypesModule Type Module Type Window Viewing I/F Summary InformationDescription IndexSta Interface Performance Statistics/Bar GraphsLoad Raw CountsInterface Statistics Window RateAddress ErrorUnicast Non-UnicastPackets Received Received only Using the Find Source Address FeatureTransmit Queue Size Transmit only Packets Transmitted Transmit onlyManaging the Hub Setting the Device Date and TimeBridge Ports Enabling and Disabling PortsModule Ports ATM Conﬁguration Accessing the ATM Connections WindowConnection Data ATM ConﬁgurationVPI SettingsAdding a New Connection Conﬁguring ConnectionsDeleting a Connection ATM Conﬁguration Conﬁguring Connections Fddi Management Fddi Management ConﬁgurationMAC State Req. Requested Target Token Rotation Time SMT VersionNeg. Negotiated Concentrator Non-M Ports Concentrator M PortsNumber of MACs MAC PathConnection Policy 15 32,768 a permanently set value for this bit Station List Address ModeNumber of Nodes Node Class Stations PanelTopology Upstream NeighborPerformance Transmit Frames Frame ErrorsReceive Frames Lost FramesFddi Management Performance Bridging Bridging Bridge Status WindowBridge State on Interface Up TimeInterface Type Bridge AddressConﬁguring Duplex Modes Enabling and Disabling Bridging Performance Graphs Bridge StatisticsForwarded Green Filtered Magenta Total Errors RedXmitted Blue Conﬁguring the Bridge Performance GraphsForwarded ErrorsFiltered XmittedForwarded to Interface Statistics WindowForwarded from Description Using Source Addressing Port Source Addresses Window Setting the Ageing TimeBridge Spanning Tree Bridge Priority Conﬁguring the Bridge Spanning Tree WindowRoot Cost Root BridgeRoot Port ProtocolHello Time Forwarding DelayMax Age Hold TimeChanging Bridge Spanning Tree Parameters Changing the Spanning Tree Algorithm Protocol Type Changing Bridge PriorityChanging Hello Time Changing Max Age Time Changing Forwarding Delay TimeChanging Port Priority Changing Path Cost Filtering DatabaseBridging Bridging Number ListCapacity Ageing TimeReceive Port Conﬁguring the Filtering DatabasePort Filtering Changing the Type of Entry Altering the Ageing TimeChanging the Receive Port Changing the Port Filtering ActionClearing All Permanent, Static, or Dynamic Entries Bridging Filtering Database Index Index-2 Index-3 Index Index-4