Cabletron Systems TSX-1620 manual Uptime, Device Name, Device Location, IP Address

Page 18

Using the TSX-1620 Hub View

Uptime

The time that the device has been running without interruption. The counter resets to 0 days 00:00:00 (days:HH:MM:SS) when one of the following occurs:

•Power to the device is cycled.

•The device is reset manually.

Device Name

This field displays the device’s MIB II ifName value. You can set this value using the SNMP MIB2 System Group window, available from the Interface menu. Consult your SPMA Tools Guide for detailed information about the System Group window and its use.

Device Location

This field displays the device’s MIB II ifLocation value. You can set this value using the SNMP MIB2 System Group window, available from the Interface menu. Consult your SPMA Tools Guide for detailed information about the System Group window and its use.

IP Address

The device’s Internet Protocol address; this field will display the IP address you have used to create the TSX-1620 icon (if you are running the Hub View from a management platform) or the IP address you used to launch the Hub View program (if you are running in stand-alone mode). You cannot change the TSX- 1620’s IP address from SPMA.

Clicking the Device button displays the Device menu, Figure 2-2, which lets you open the Polling Intervals window.

Figure 2-2. TSX-1620 Hub View Device Menu

See Setting the Polling Intervals on page 2-15for details about the Polling Intervals window.

Note that the Device menu does not provide access to every application which is available to the TSX-1620; some information is only available from the Module, Interface, Bridge, and/or Bridge Port menus, and several applications can only be accessed either from the icon menu (if you are running under a network management platform) or from the command line (if you are running in stand- alone mode). See Chapter 1, Introduction to SPMA for the TSX-1620, for a complete list of applications available to the TSX-1620 and how to access each one.

2-4

Using the Hub View

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Portable Management Application For TSX-1620 User’s Guide Page Virus Disclaimer Restricted Rights Notice Applicable to licenses to the United States Government onlyContents Chapter Using the TSX-1620 Bridge View ContentsUsing the TSX-1620 User’s Guide Introduction to Spma for the TSX-1620What’s not in the TSX-1620 User’s Guide Introduction to Spma for the TSX-1620Conventions Screen DisplaysIntroduction to Spma for the TSX-1620 Using the Mouse ButtonGetting Help FTPTSX-1620 Firmware Introduction to Spma for the TSX-1620 TSX-1620 Firmware Using the TSX-1620 Hub View Using the Hub ViewUsing the TSX-1620 Hub View Navigating Through the Hub ViewHub View Front Panel TSX-1620 Hub ViewDevice Location UptimeDevice Name IP AddressUsing the Mouse in the TSX-1620 Hub View Port StatusTSX-1620 Application Displays Interface Application Display Interface Application Display Menu StructureBridge Application Display Interface Port Display Form Options Monitoring Device PerformancePort Display Form Oper StatusInterface Number TypeSpeed StatisticsUsing the TSX-1620 Hub View Port Color Codes for the Interface Application Display Admin Bridge Port Display Form OptionsTp Frames Forwarded Sr Frames Forwarded Clearing Statistical InformationTp Frames Filtered Bridge Port NumberSetting the Polling Intervals Managing the DeviceDevice Configuration Contact StatusDevice General Status Port Operational StateUsing the Bridge Config Utility Defining Community Names Configuring Your TSX-1620’s Serial Port Using the TSX-1620 Hub View Performing if Configuration 11. The if Configuration WindowChanging the Displayed Interface Performing Interface ConfigurationViewing NetBios Information Address Viewing and Changing System InformationName PortSetting the Device Date, Time, and Daylight Savings Mode Configuring Port SecurityViewing Your Port Security Settings Using the TSX-1620 Hub View Configuring Your Port Security Settings Viewing the Interface List 17. The Interface List WindowAccessing the MIB I, II Tool Accessing Bridge ManagementPerforming Source Routing Configuration for a Port Viewing a Bridge Port’s Source Address List Enabling/Disabling Bridging for TSX-1620 Ports Enabling and Disabling Bridge PortsUsing the TSX-1620 Hub View Using the TSX-1620 Hub View Managing the Device Using the TSX-1620 Bridge View Bridging BasicsTransparent Bridging Source Route BridgingAccessing the Bridge Traffic View Window Source Route Transparent BridgesNavigating Through the Bridge Traffic View Click on in the Bridge Traffic View front panel Bridge Traffic View Front Panel Time and DateMAC Address Bridge Port Display Port # MACEnabled Blocking Using the Detail View Window Detail View Showing Two PortsBridge Status Window Bridge Statistics Window Total Ports DelayExceedDiscardBridging Type IfIndexFiltering Database Window MtuExceedDiscardViewing the Filtering Database Source Address Ageing Time secsLearned Entry Discards StatusReceive Port Destination PortChanging the Filtering Database Dynamic Ageing Time Changing Forwarding and Static Database Entries Changing the Filtering Database Ageing TimeStatic Address Forward To PortsSpanning Tree Protocol Window Finding a Filtering Database MAC AddressDeleting a Static Table Entry 11. Spanning Tree Protocol Window Designated Root Forward DelaySpanning Tree Version Num. Topology ChgsPriority Max AgeHello Time Root PortRoot Forward Delay Root Max AgeRoot Hello Time Spanning Tree Port Parameters Window Changing Spanning Tree ParametersPriority Port Path Cost Designated CostDesignated Bridge Source Routing Configuration WindowChanging a Port’s STA Parameters Designated PortInterface Hop CountTarget Segment Number Local Segment NumberBridge Number Largest FrameSTE Span Mode Changing Source Routing Port ParametersCreating Bridge Traffic Charts, Graphs and Meters 14. Pie Chart WindowConfiguring Forwarding Thresholds 15. Port Forwarding Thresholds Window Using the TSX-1620 Bridge View Viewing the Forwarding Log To clear all logs or just the current log Changing Polling Intervals 17. The Polling Intervals WindowDevice Info Enabling and Disabling PortsEnabling and Disabling a Transparent Bridge Port Bridge Port Display Info18. Port Enable/Disable Source Routing Window Enabling and Disabling a Source Routing Bridge PortUsing the TSX-1620 Bridge View Index Index-2 Index-3 Index-4 Index-5 Index Index-6

TSX-1620 specifications

The Cabletron Systems TSX-1620 is a pioneering piece of network hardware that played a significant role in the evolution of networking technologies during the 1990s. This well-engineered device is primarily recognized as a multi-port Ethernet switch that was designed to provide high-speed, reliable connectivity for local area networks (LANs). As organizations increasingly demanded robust performance and enhanced network capabilities, the TSX-1620 emerged as a powerful solution to address these needs.

One of the key features of the TSX-1620 is its support for both 10Base-T and 100Base-T standards, catering to both standard Ethernet and Fast Ethernet connections. This versatility allowed businesses to easily transition from older Ethernet systems to newer, faster specifications without replacing their entire infrastructure. The switch could intelligently manage traffic between devices, minimizing collisions and ensuring that data packets were transmitted efficiently.

The architecture of the TSX-1620 includes support for various advanced technologies that enhance network performance. Its store-and-forward switching capability improves data integrity by checking packets for errors before forwarding them to their destination. This process reduces the risk of corrupted data affecting network performance, making it especially valuable for mission-critical applications.

Another notable feature is its robust security tools. The TSX-1620 incorporates VLAN (Virtual Local Area Network) support, enabling network administrators to segment traffic and improve security across different departments or user groups. This not only mitigates the risk associated with unauthorized access but also optimizes network traffic by confining broadcasts to designated VLANs.

Scalability is a prominent characteristic of the TSX-1620. With ports available for expansion, organizations could easily increase their network capacity as their needs grew. This feature promoted long-term investment in network infrastructure, allowing businesses to adapt quickly to changing demands without incurring substantial costs.

Reliability is paramount in networking equipment, and the TSX-1620 does not disappoint. Engineered with high-quality components, this switch was built to operate efficiently in a variety of environments while maintaining stable performance. Its design ensures a cooling mechanism that minimizes overheating, thereby prolonging its operational lifespan.

In summary, the Cabletron Systems TSX-1620 represents a significant advancement in network switch technology during its era. Its combination of speed, versatility, security features, and robust architecture made it a valuable asset for organizations seeking to enhance their networking capabilities and prepare for the future.
Top Page Image Contents