Cabletron Systems manual Enabling/Disabling Bridging for TSX-1620 Ports

Page 46

Using the TSX-1620 Hub View

Figure 2-18. The Bridge Port Source Address Window

The Interface field at the top of the window displays the interface number of the selected port.

The Bridge Port Source Address window displays addresses of all devices that have transmitted packets that were detected by the selected bridge port within a time period less than the Filtering Database’s defined ageing time (addresses that have not transmitted a packet during one complete cycle of the ageing timer will be purged). The Filtering Database’s ageing timer is user-configurable; see Chapter 3, Using the TSX-1620 Bridge View, for details. The Bridge Port Source Address window can display about ten addresses at once; use the scroll bar to the right of the list to view additional addresses, if necessary.

Enabling/Disabling Bridging for TSX-1620 Ports

You can enable or disable bridging for individual TSX-1620 ports using the Bridge Port menus.

Enabling and Disabling Bridge Ports

When you disable a bridge port, you disconnect that port’s network from the bridge entirely. The port does not forward any packets, nor does it participate in Spanning Tree operations. Nodes connected to the network can still communicate with each other, but they can’t communicate with the bridge or with other networks connected to the TSX-1620. When you enable a port, the port moves from the Disabled state through the Learning and Listening states to the Forwarding state; bridge port state color codes will change accordingly.

2-32

Managing the Device

Page 45 Page 47
Image 46
Page 45 Page 47
Contents Portable Management Application For TSX-1620 User’s Guide Page Virus Disclaimer Restricted Rights Notice Applicable to licenses to the United States Government onlyContents Chapter Using the TSX-1620 Bridge View ContentsUsing the TSX-1620 User’s Guide Introduction to Spma for the TSX-1620What’s not in the TSX-1620 User’s Guide Introduction to Spma for the TSX-1620Conventions Screen DisplaysIntroduction to Spma for the TSX-1620 Using the Mouse ButtonGetting Help FTPTSX-1620 Firmware Introduction to Spma for the TSX-1620 TSX-1620 Firmware Using the TSX-1620 Hub View Using the Hub ViewUsing the TSX-1620 Hub View Navigating Through the Hub ViewHub View Front Panel TSX-1620 Hub ViewDevice Location UptimeDevice Name IP AddressUsing the Mouse in the TSX-1620 Hub View Port StatusTSX-1620 Application Displays Interface Application Display Interface Application Display Menu StructureBridge Application Display Interface Port Display Form Options Monitoring Device PerformancePort Display Form Oper StatusInterface Number TypeSpeed StatisticsUsing the TSX-1620 Hub View Port Color Codes for the Interface Application Display Bridge Port Display Form Options AdminTp Frames Forwarded Sr Frames Forwarded Clearing Statistical InformationTp Frames Filtered Bridge Port NumberSetting the Polling Intervals Managing the DeviceDevice Configuration Contact StatusDevice General Status Port Operational StateUsing the Bridge Config Utility Defining Community Names Configuring Your TSX-1620’s Serial Port Using the TSX-1620 Hub View Performing if Configuration 11. The if Configuration WindowChanging the Displayed Interface Performing Interface ConfigurationViewing NetBios Information Address Viewing and Changing System InformationName PortSetting the Device Date, Time, and Daylight Savings Mode Configuring Port SecurityViewing Your Port Security Settings Using the TSX-1620 Hub View Configuring Your Port Security Settings Viewing the Interface List 17. The Interface List WindowAccessing Bridge Management Accessing the MIB I, II ToolPerforming Source Routing Configuration for a Port Viewing a Bridge Port’s Source Address List Enabling/Disabling Bridging for TSX-1620 Ports Enabling and Disabling Bridge PortsUsing the TSX-1620 Hub View Using the TSX-1620 Hub View Managing the Device Using the TSX-1620 Bridge View Bridging BasicsTransparent Bridging Source Route BridgingAccessing the Bridge Traffic View Window Source Route Transparent BridgesNavigating Through the Bridge Traffic View Click on in the Bridge Traffic View front panel Time and Date Bridge Traffic View Front PanelMAC Address Bridge Port Display Port # MACEnabled Blocking Using the Detail View Window Detail View Showing Two PortsBridge Status Window Bridge Statistics Window Total Ports DelayExceedDiscardBridging Type IfIndexFiltering Database Window MtuExceedDiscardViewing the Filtering Database Source Address Ageing Time secsLearned Entry Discards StatusReceive Port Destination PortChanging the Filtering Database Dynamic Ageing Time Changing Forwarding and Static Database Entries Changing the Filtering Database Ageing TimeStatic Address Forward To PortsFinding a Filtering Database MAC Address Spanning Tree Protocol WindowDeleting a Static Table Entry 11. Spanning Tree Protocol Window Designated Root Forward DelaySpanning Tree Version Num. Topology ChgsPriority Max AgeHello Time Root PortRoot Max Age Root Forward DelayRoot Hello Time Changing Spanning Tree Parameters Spanning Tree Port Parameters WindowPriority Port Path Cost Designated CostDesignated Bridge Source Routing Configuration WindowChanging a Port’s STA Parameters Designated PortInterface Hop CountTarget Segment Number Local Segment NumberBridge Number Largest FrameSTE Span Mode Changing Source Routing Port ParametersCreating Bridge Traffic Charts, Graphs and Meters 14. Pie Chart WindowConfiguring Forwarding Thresholds 15. Port Forwarding Thresholds Window Using the TSX-1620 Bridge View Viewing the Forwarding Log To clear all logs or just the current log Changing Polling Intervals 17. The Polling Intervals WindowDevice Info Enabling and Disabling PortsEnabling and Disabling a Transparent Bridge Port Bridge Port Display Info18. Port Enable/Disable Source Routing Window Enabling and Disabling a Source Routing Bridge PortUsing the TSX-1620 Bridge View Index Index-2 Index-3 Index-4 Index-5 Index Index-6

TSX-1620 specifications

The Cabletron Systems TSX-1620 is a pioneering piece of network hardware that played a significant role in the evolution of networking technologies during the 1990s. This well-engineered device is primarily recognized as a multi-port Ethernet switch that was designed to provide high-speed, reliable connectivity for local area networks (LANs). As organizations increasingly demanded robust performance and enhanced network capabilities, the TSX-1620 emerged as a powerful solution to address these needs.

One of the key features of the TSX-1620 is its support for both 10Base-T and 100Base-T standards, catering to both standard Ethernet and Fast Ethernet connections. This versatility allowed businesses to easily transition from older Ethernet systems to newer, faster specifications without replacing their entire infrastructure. The switch could intelligently manage traffic between devices, minimizing collisions and ensuring that data packets were transmitted efficiently.

The architecture of the TSX-1620 includes support for various advanced technologies that enhance network performance. Its store-and-forward switching capability improves data integrity by checking packets for errors before forwarding them to their destination. This process reduces the risk of corrupted data affecting network performance, making it especially valuable for mission-critical applications.

Another notable feature is its robust security tools. The TSX-1620 incorporates VLAN (Virtual Local Area Network) support, enabling network administrators to segment traffic and improve security across different departments or user groups. This not only mitigates the risk associated with unauthorized access but also optimizes network traffic by confining broadcasts to designated VLANs.

Scalability is a prominent characteristic of the TSX-1620. With ports available for expansion, organizations could easily increase their network capacity as their needs grew. This feature promoted long-term investment in network infrastructure, allowing businesses to adapt quickly to changing demands without incurring substantial costs.

Reliability is paramount in networking equipment, and the TSX-1620 does not disappoint. Engineered with high-quality components, this switch was built to operate efficiently in a variety of environments while maintaining stable performance. Its design ensures a cooling mechanism that minimizes overheating, thereby prolonging its operational lifespan.

In summary, the Cabletron Systems TSX-1620 represents a significant advancement in network switch technology during its era. Its combination of speed, versatility, security features, and robust architecture made it a valuable asset for organizations seeking to enhance their networking capabilities and prepare for the future.
Top Page Image Contents