Cabletron Systems TSX-1620 manual Static Address, Forward To Ports

Page 69

Using the TSX-1620 Bridge View

Figure 3-9. Static Table Window

Static Address

The Static Address field will display the MAC address of the entry you highlighted in the Filtering Database window. If no entry was selected, the address field will contain zeros, and a valid MAC address may be entered.

Receive Port

The Receive Port list box specifies the port on which packets from the specified static address must be received in order for the static database entry to apply. If All is selected, the entry will be applied to packets forwarded to any port.

Forward To Ports

The Forward To Ports list box specifies the ports to which packets with the specified source address received on the specified ports will be forwarded. The port or ports selected in this list will be displayed in the Filtering Database window as the Destination Port.

To change an entry:

1.Click mouse button 1 on the port in the Receive Port list box that you want to specify as the receive port for the entry in the Static Address field (remember that if All is selected, the entry will be applied to packets received on any port).

2.Click mouse button 1 on any port or ports in the Forward To Ports list that you want to be displayed in the Filtering Database window as the destination port.

3.Click mouse button 1 on the Status button and choose one of the following: permanent—The entry won’t be aged out or deleted on reset.

The Filtering Database Window

3-21

Page 68 Page 70
Image 69
Page 68 Page 70
Contents Portable Management Application For TSX-1620 User’s Guide Page Virus Disclaimer Applicable to licenses to the United States Government only Restricted Rights NoticeContents Contents Chapter Using the TSX-1620 Bridge ViewIntroduction to Spma for the TSX-1620 Using the TSX-1620 User’s GuideIntroduction to Spma for the TSX-1620 What’s not in the TSX-1620 User’s GuideScreen Displays ConventionsIntroduction to Spma for the TSX-1620 Button Using the MouseFTP Getting HelpTSX-1620 Firmware Introduction to Spma for the TSX-1620 TSX-1620 Firmware Using the Hub View Using the TSX-1620 Hub ViewNavigating Through the Hub View Using the TSX-1620 Hub ViewTSX-1620 Hub View Hub View Front PanelDevice Name UptimeDevice Location IP AddressPort Status Using the Mouse in the TSX-1620 Hub ViewTSX-1620 Application Displays Interface Application Display Menu Structure Interface Application DisplayBridge Application Display Port Display Form Monitoring Device PerformanceInterface Port Display Form Options Oper StatusSpeed TypeInterface Number StatisticsUsing the TSX-1620 Hub View Port Color Codes for the Interface Application Display Admin Bridge Port Display Form OptionsTp Frames Forwarded Tp Frames Filtered Clearing Statistical InformationSr Frames Forwarded Bridge Port NumberManaging the Device Setting the Polling IntervalsDevice General Status Contact StatusDevice Configuration Port Operational StateUsing the Bridge Config Utility Defining Community Names Configuring Your TSX-1620’s Serial Port Using the TSX-1620 Hub View 11. The if Configuration Window Performing if ConfigurationPerforming Interface Configuration Changing the Displayed InterfaceViewing NetBios Information Name Viewing and Changing System InformationAddress PortConfiguring Port Security Setting the Device Date, Time, and Daylight Savings ModeViewing Your Port Security Settings Using the TSX-1620 Hub View Configuring Your Port Security Settings 17. The Interface List Window Viewing the Interface ListAccessing the MIB I, II Tool Accessing Bridge ManagementPerforming Source Routing Configuration for a Port Viewing a Bridge Port’s Source Address List Enabling and Disabling Bridge Ports Enabling/Disabling Bridging for TSX-1620 PortsUsing the TSX-1620 Hub View Using the TSX-1620 Hub View Managing the Device Bridging Basics Using the TSX-1620 Bridge ViewSource Route Bridging Transparent BridgingSource Route Transparent Bridges Accessing the Bridge Traffic View WindowNavigating Through the Bridge Traffic View Click on in the Bridge Traffic View front panel Bridge Traffic View Front Panel Time and DateMAC Address Bridge Port Display MAC Port #Enabled Blocking Detail View Showing Two Ports Using the Detail View WindowBridge Status Window Bridge Statistics Window Bridging Type DelayExceedDiscardTotal Ports IfIndexMtuExceedDiscard Filtering Database WindowViewing the Filtering Database Learned Entry Discards Ageing Time secsSource Address StatusDestination Port Receive PortChanging the Filtering Database Dynamic Ageing Time Changing the Filtering Database Ageing Time Changing Forwarding and Static Database EntriesForward To Ports Static AddressSpanning Tree Protocol Window Finding a Filtering Database MAC AddressDeleting a Static Table Entry 11. Spanning Tree Protocol Window Spanning Tree Version Forward DelayDesignated Root Num. Topology ChgsHello Time Max AgePriority Root PortRoot Forward Delay Root Max AgeRoot Hello Time Spanning Tree Port Parameters Window Changing Spanning Tree ParametersPriority Port Designated Cost Path CostChanging a Port’s STA Parameters Source Routing Configuration WindowDesignated Bridge Designated PortHop Count InterfaceBridge Number Local Segment NumberTarget Segment Number Largest FrameChanging Source Routing Port Parameters STE Span Mode14. Pie Chart Window Creating Bridge Traffic Charts, Graphs and MetersConfiguring Forwarding Thresholds 15. Port Forwarding Thresholds Window Using the TSX-1620 Bridge View Viewing the Forwarding Log To clear all logs or just the current log 17. The Polling Intervals Window Changing Polling IntervalsEnabling and Disabling a Transparent Bridge Port Enabling and Disabling PortsDevice Info Bridge Port Display InfoEnabling and Disabling a Source Routing Bridge Port 18. Port Enable/Disable Source Routing WindowUsing the TSX-1620 Bridge View Index Index-2 Index-3 Index-4 Index-5 Index Index-6

TSX-1620 specifications

The Cabletron Systems TSX-1620 is a pioneering piece of network hardware that played a significant role in the evolution of networking technologies during the 1990s. This well-engineered device is primarily recognized as a multi-port Ethernet switch that was designed to provide high-speed, reliable connectivity for local area networks (LANs). As organizations increasingly demanded robust performance and enhanced network capabilities, the TSX-1620 emerged as a powerful solution to address these needs.

One of the key features of the TSX-1620 is its support for both 10Base-T and 100Base-T standards, catering to both standard Ethernet and Fast Ethernet connections. This versatility allowed businesses to easily transition from older Ethernet systems to newer, faster specifications without replacing their entire infrastructure. The switch could intelligently manage traffic between devices, minimizing collisions and ensuring that data packets were transmitted efficiently.

The architecture of the TSX-1620 includes support for various advanced technologies that enhance network performance. Its store-and-forward switching capability improves data integrity by checking packets for errors before forwarding them to their destination. This process reduces the risk of corrupted data affecting network performance, making it especially valuable for mission-critical applications.

Another notable feature is its robust security tools. The TSX-1620 incorporates VLAN (Virtual Local Area Network) support, enabling network administrators to segment traffic and improve security across different departments or user groups. This not only mitigates the risk associated with unauthorized access but also optimizes network traffic by confining broadcasts to designated VLANs.

Scalability is a prominent characteristic of the TSX-1620. With ports available for expansion, organizations could easily increase their network capacity as their needs grew. This feature promoted long-term investment in network infrastructure, allowing businesses to adapt quickly to changing demands without incurring substantial costs.

Reliability is paramount in networking equipment, and the TSX-1620 does not disappoint. Engineered with high-quality components, this switch was built to operate efficiently in a variety of environments while maintaining stable performance. Its design ensures a cooling mechanism that minimizes overheating, thereby prolonging its operational lifespan.

In summary, the Cabletron Systems TSX-1620 represents a significant advancement in network switch technology during its era. Its combination of speed, versatility, security features, and robust architecture made it a valuable asset for organizations seeking to enhance their networking capabilities and prepare for the future.
Top Page Image Contents