Cabletron Systems HSIM-A6DP manual Adding an Entry PVC

Page 39

The Add/Delete Entry Screen

Encapsulation Type (Toggle)

This field displays the type of data encapsulation that the HSIM-A6DP will use to perform LAN to ATM translation. This field toggles between the following options:

•VC Mux 802.3 Bridged - VC Based Multiplexing for Bridged Protocols as defined by the IETF RFC 1483.

•LLC Encapsulated - Logical Link Control for Bridged Protocols as defined by the IETF RFC 1483.

ADD/MODIFY (Command)

This command adds the PVC, or the modified PVC, to the HSIM-A6DP connection table.

DELETE (Command)

This command appears only if a valid VCI has been entered in the VCI field of the Add/Delete Entry screen. This command deletes the PVC from the HSIM-A6DP connection table.

3.7.2Adding an Entry (PVC)

To add an entry (PVC), perform the following steps:

1.Use the arrow keys to highlight the VPI field and enter 0.

NOTE

The VCI values 0 through 31 are reserved for ATM Forum use only.

2.Use the arrow keys to highlight the VCI field and enter a VCI value from 32–1020.

3.Use the arrow keys to highlight the Encapsulation Type field and press the SPACE bar until the desired Encapsulation Type appears.

4.Use the arrow keys to highlight the ADD/MODIFY command.

5.Press ENTER. The “ENTRY ADDED” message appears at the top of the screen indicating that Local Management has added the PVC.

HSIM-A6DP User’s Guide

3-13

Page 38 Page 40
Image 39
Page 38 Page 40
Contents HSIM-A6DP Page HSIM-A6DP User’s Guide DOC Notice Cabletron Software Program License HSIM-A6DP User’s Guide Declaration of Conformity HSIM-A6DP User’s Guide Contents Viii HSIM-A6DP User’s Guide Chapter Contents HSIM-A6DP User’s Guide Chapter Introduction Document Conventions Using this ManualOverview FeaturesRelated Manuals SpecificationsYour email address Getting HelpHSIM-A6DP User’s Guide Unpacking the Hsim Chapter InstallationRemoving the Apim Coverplate Installing APIMsInstalling APIMs Installing an Hsim in an Interface Module Installing AN HsimInstalling an Hsim Installing the HSIM-A6DP Installing an Hsim in a Standalone Hub HSIM-A6DP User’s Guide Chapter Local Management Keyboard Conventions Local Management Keyboard ConventionsNavigating Local Management Screens Selecting Local Management Menu Screen ItemsExiting Local Management Screens Using the Return Command HSIM-A6DP ATM Screen Accessing Local ManagementHSIM-A6DP ATM Screen ATM Connections Screen ATM Connections ScreenATM Connections Screen Fields 6E132-25 Local Management Interface 25 ATM Connection Setup ATM Connection Setup ScreenATM Connection Setup Screen Fields Encapsulation Type Read-Only 1 Add/Delete Entry Screen Fields ADD/DELETE Entry ScreenAdding an Entry PVC Deleting an Entry PVC Modifying an Entry PVCATM Redundancy Configuration Screen ATM Redundancy Configuration ScreenATM Redundancy Configuration Screen Fields Active Port Read-Only Setting the Redundancy Status Setting the Primary PortSetting the Active Port Setting the Revert to Primary Port Field Setting the Activation of Redundant Port FieldSetting the Periodic Test Time Setting the Periodic Test Status FieldUsing the Reset to Factory Defaults Command Using the Test Ports NOW CommandATM LEC Screen ATM LEC ScreenATM LEC Screen Fields ATM LEC Table Screen ATM LEC Table ScreenATM LEC Table Screen Fields Prev Command 6E132-25 Local Management Interface 25 Elan Administration LEC Administration ScreenLEC Administration Screen Fields Modify Mode 11.3 Configuring the LEC Automatically Create Mode Only Changing the LEC Status Modify Mode Only11.4 Configuring the LEC Manually Create Mode Only Modifying an Existing LEC Deleting an Existing LEC Elan Properties Screen Fields Elan Properties ScreenThis field displays the ATM Address of the LEC Lecs ATM Addr Read-Only Interface 25 LEC ARP Cache Screen LEC ARP Cache ScreenLEC ARP Cache Screen Fields Search Command LEC ARP Cache Search Screen LEC ARP Cache Search ScreenPerforming a Search LEC ARP Cache Search Screen Fields13 LEC ARP Cache Search Results VPI, VCI Read-Only Auto Configure Enabled Signalling ScreenSignaling Screen Fields Changing the Ilmi Status Disabling the Ilmi Status Changing the UNI Status Restarting UNIRestarting the Ilmi Setting the UNI Version 15 The ATM Discovery Elan Setup Screen Discovery Elan Setup ScreenATM Discovery Elan Setup Screen Fields Assigning the HSIM-A6DP to a discovery Elan Discovery Elan Setup Screen Enabling the Bandwidth Allocation Mode Feature Using the Bandwidth Allocation Mode FeatureEnabling the Bandwidth Allocation Mode Feature 17 The Bandwidth Allocation Mode Warning Screen 6E132-25 Local Management Interface 25 ATM Connection Setup Creating Pvcs with the Bandwidth Allocation Mode EnabledThis field displays the port Apim on which the PVC resides BW Mbps Read-Only 19 The Add/Delete Entry Screen 20.1 Add/Delete Entry Screen FieldsTotal Bandwidth On Interface Read-Only Adding an Entry PVC Modifying an Entry PVC Deleting an Entry PVC HSIM-A6DP LEDs ChapterLanview LEDs APIM-11 Specifications Appendix a Apim SpecificationsOC3 APIM-21 SpecificationsFigure A-3 APIM-29 APIM-29 SpecificationsFigure A-4 APIM-29LR APIM-29LR SpecificationsSTS3 APIM-22 SpecificationsBNC APIM-67 SpecificationsAPIM-67 Specifications HSIM-A6DP User’s Guide

HSIM-A6DP specifications

Cabletron Systems HSIM-A6DP is a versatile and powerful hardware component designed for use in networking environments. Primarily known as a High-Speed Interface Module, the HSIM-A6DP offers superior performance for connecting various network devices. Its design reflects the need for speed and reliability in an increasingly digital landscape, making it a popular choice among IT professionals and network administrators.

One of the standout features of the HSIM-A6DP is its ability to support high-speed data transmission. This module is capable of delivering up to 1 Gbps of throughput, which significantly enhances network performance. This speed is critical for applications that require quick data exchanges, such as video conferencing, large file transfers, and real-time data analysis.

Another key characteristic of the HSIM-A6DP is its dual-port functionality. This allows for increased flexibility in network configurations, enabling users to efficiently manage multiple connections. It supports both copper and fiber optic connections, catering to diverse networking requirements. The module is engineered with various fiber optic standards, ensuring compatibility with existing network setups.

The HSIM-A6DP is built with advanced technologies to ensure the robustness and reliability of the network. It uses sophisticated error detection and correction protocols, contributing to data integrity and minimizing packet loss. This reliability is essential for businesses that rely on consistent and accurate data transmission.

In terms of scalability, the HSIM-A6DP supports modular network topologies. This means it can be easily integrated into existing network infrastructures, allowing for gradual upgrades without the need for total overhauls. The module can also adapt to emerging technologies, which is a significant advantage as businesses evolve and expand.

Moreover, the HSIM-A6DP is designed with a user-friendly interface for ease of configuration and management. Its plug-and-play capability simplifies installation, allowing technicians to set up the module quickly without extensive training or technical expertise.

In summary, the Cabletron Systems HSIM-A6DP is an essential component for high-speed networking solutions. Its main features, including 1 Gbps throughput, dual-port functionality, and robust error management capabilities, make it suitable for modern networking demands. Its scalability and ease of use further enhance its appeal to businesses looking for an efficient and reliable networking solution. With the HSIM-A6DP, organizations can meet their growing data transmission needs while maintaining optimal performance.
Top Page Image Contents