Wall-Mounting the STH
Figure 3-5. Installing the Wall Mounting Brackets
2.Select the wall location for the STH within 7 feet of a power outlet.
Warning: There is a SHOCK HAZARD whe drilling into walls containing electrical wiring. Select a wall location where drill bits and screw anchors will not come in contact with electrical wiring in the wall.
3.Get a pencil. With the wall mounting brackets attached to the STH, position the STH against the wall where it will be permanently mounted with the network port facing down, as shown in Figure 3-6, and mark the screw holes’ positions on the wall.
4.Set the STH aside and carefully drill four 1/4" pilot holes, one for each screw anchor.
5.Install the screw anchors.
6.Position the STH on the wall, aligning the screw holes over the anchors and reinstall the four anchor screws to attach the STH to the wall. Tighten the four anchor screws.
Page