Cabletron Systems 42, STHI-44, STH-22, 24 manual Installation, Unpacking the STH, Installing the STH

Page 26

CHAPTER 3

INSTALLATION

This chapter outlines the procedure for installing the STH and adding it to a stack. Confirm that the network meets the guidelines and requirements outlined in Chapter 2, Installation Requirements/ Specifications, before installing the STH.

3.1Unpacking the STH

Unpack the STH as follows:

1.Carefully remove the STH from the shipping box. Preserve the shipping box and packing materials for future use.

2.Visually inspect the STH. If there are any signs of damage, contact Cabletron Systems Technical Support immediately.

3.2Installing the STH

All installations must meet the requirements listed below:

A single phase 120Vac, 15A, grounded power receptacle must be within 7 feet of the STH.

Shelving units must be able to support 30 pounds of static weight per hub in the stack.

The temperature for the selected location must be maintained between 5° and 50°C, and fluctuate less than 10°C per hour.

The following sections provide instructions for stacking the STH.

3.2.1Rack Mount or Wall Mount Hardware

Provided with the STH is an accessory kit that includes Rack Mount Brackets for installations into 19 inch racks, Wall Mount Brackets and Mounting Screws for installations on walls, and a Strain Relief Bracket to minimize stresses imflicted by cables hanging from the TCU ports.

Page 3-1

Image 26
Contents Stackable Token Ring HUB USER’S Guide Page FCC Notice DOC NoticeCabletron SYSTEMS, INC Program License Agreement Cabletron Software Program LicenseExclusion of Warranty Disclaimer of Liability United States Government Restricted Rights Contents Installation TroubleshootingSTH Overview Using This ManualIntroduction STH Overview HubSTACKLanview LEDs Lobe Port and Multiple Ring Out Port ConfigurationsRing Speed Fault Protection Lanview LEDsAutomatic Beacon Recovery Process Automatic Beacon Recovery ProcessDaughter Board Upgrade Kit Active CircuitryImproved Protection from Beaconing Related ManualsRelated Manuals No Connection RedundancyDAISY-CHAIN MAU Configuration Getting Help Getting HelpMaximum Number of Stations on a Ring Requirements & SpecificationsGeneral Considerations CrosstalkGeneral Considerations TemperatureInstallation Recommendations Cable Specifications Cable SpecificationsUTP Cabling Specifications UTP Cable CategoriesUTP Cable Categories NextUTP Lobe Lengths STP Cabling SpecificationsUTP Lobe Lengths STP Lobe Lengths STP Cable CategoriesSTP Cable Categories TCU Specifications TCU SpecificationsRing Speed Operating SpecificationsOperating Specifications Ring Sequence Power Supply RequirementsRing Sequence Environmental Requirements SafetyEnvironmental Requirements PhysicalUnpacking the STH InstallationInstalling the STH Rack Mount or Wall Mount HardwareAdding the STH to a Stack Adding the STH to a StackRack-Mounting the STH Attaching the Strain Relief BracketAttaching the Strain Relief Bracket Wall-Mounting the STH Wall-Mounting the STHWall-Mounting the STH Free-Standing Installation Free-Standing InstallationAttaching Network Cabling to TCU Ports Connecting the STH to the Power SourceConnecting the STH to the Power Source Finishing the Installation Finishing the InstallationTrouble Resolution TroubleshootingLanview LED Signals Failure to Link on Enabled Port Trouble ResolutionLoss Of Power Ring Speed Fault

42, 24, STHI-44, STH-22 specifications

Cabletron Systems was a pioneer in networking technology, and its STH series, particularly the STH-22 and STHI-44, 24, and 42 models, stand out in the history of networking equipment. These devices were designed for high-performance network management and offered a multitude of features that helped organizations manage their networking resources efficiently.

The STH-22 was a compact and efficient network switch, primarily developed to serve small to medium-sized businesses. One of its main features was its ability to support multiple user connections while offering low latency and high throughput. The STH-22 utilized advanced packet-switching technology to ensure data could move rapidly across the network, enhancing overall communication and productivity.

On the other hand, the STHI-44 model addressed the needs of larger enterprises. It featured advanced routing protocols and could handle a greater number of simultaneous connections, making it ideal for environments with high data traffic. The STHI-44 also incorporated redundancy features to minimize downtime, a vital requirement for businesses that relied heavily on continuous network availability.

The STH-24 and STH-42 models focused on versatility and scalability, catering to a broad range of networking needs. Both models provided extensive support for various networking protocols and featured robust hardware for enhanced durability. The STH-24 was designed for offices requiring mid-range capabilities, while the STH-42 targeted enterprises with more demanding networking requirements.

All STH series devices were built with ease of management in mind. They included user-friendly interfaces that allowed IT personnel to monitor traffic, configure network settings, and troubleshoot issues in real-time. Additionally, the devices supported SNMP (Simple Network Management Protocol) for seamless integration into existing network management systems.

Another defining characteristic of the Cabletron STH series was its commitment to security. These devices came equipped with features that permitted administrators to set access controls and monitor network activity, thereby safeguarding against unauthorized access and potential threats.

In summary, Cabletron Systems' STH-22, STHI-44, STH-24, and STH-42 models represent a significant advancement in networking technology. With their diverse features, high-performance capabilities, and user-centric design, they have served a critical role in optimizing network resources, ensuring businesses were equipped to handle increasing connectivity demands.