D-Link DFL-200 warranty Restart your computer

Restart your computer

To obtain a new IP address from the DFL-200 you wll need to restart your computer. Make sure that the network adapter in your computer is confi gured properly fi rst. Instructions on how to confi gure the network adapter to obtain an IP address automatically from the DFL-200 can be found in the appendix.

STATUS LED – will fl ash consistently to indicate that the DFL-200 is working properly.

POWER LED – a solid light indicates a proper connection to the power supply.

NETWORK LEDs – a solid light on the port indicates a connection to an Ethernet enabled computer. These LEDs blinks during data transmission.

3