D-Link DFL-200 warranty Static IP, Click Next PPPoE

Page 7

The Setup Wizard (continued)

Step 3 - Static IP

If you selected Static IP you have to fi ll out the IP address information provided to you by your ISP. You will need to complete all the required fi elds except for Secondary DNS Server. You should probably not use the numbers displayed in these fi elds, they are only used as an example.

Click Next and continue to step 4 further down.

Click Next

Step 3 - PPPoE

If you selected PPPoE (Point- to-Point Protocol over Ethernet) you will have to fi ll out the user name and password provided to you by your ISP. The PPPoE Service Name fi eld should

be left blank unless your ISP informs you otherwise.

Click Next and continue to step 4 further down.

Click Next

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Before You Begin Check Your Package ContentsCOM Port Used to Reset system Restart your computer Open your Web browser and type http//192.168.1.1 into Using The Setup WizardEnter or Return key Click Next Set timezone Setup WizardSet admin password Welcome to the DFL-200 connection wizardConfigure WAN interface Click Next PPPoE Static IPPptp tunnel parameters PptpPhysical interface parameters Big Pond Click Next Configure helper servers Set up built-in Dhcp serverSetup Wizard Complete Computer Click OKSystem Preferences Select Built-in Ethernet Go to the Apple Menu Click On Network and SelectTechnical Support
Related manuals
Manual 12 pages 24 Kb Manual 133 pages 54.3 Kb
Top Page Image Contents