Brocade Communications Systems 8770-4 Managing cables, Installing Qsfp transceivers and cables

Page 31

Transceivers are keyed so that they can only be inserted with the correct orientation. If a transceiver does not slide in easily, ensure that it is correctly oriented.

2.Position a cable so that the key (the ridge on one side of the cable connector) is aligned with the slot in the transceiver. Insert the cable into the transceiver until the latching mechanism clicks.

Cables are keyed so that they can be inserted in only one way. If a cable does not slide in easily, ensure that it is correctly oriented.

3.Repeat step 1 and step 2 for the remaining ports.

4.If you are using direct-attach cables, you can insert them at this time.

5.Organize the cables. Refer to “Managing cables.”

6.Verify the Brocade VDX 8770-4 and port status using the show interface command.

7.Verify fabric connectivity using the show fabric all command.

Installing QSFP transceivers and cables

Complete the following steps to install the QSFP transceivers and cables in the 12x40G line cards.

Because each QSFP transceiver consists of four 10 GbE ports, be aware that any problems with one port could affect all four ports in the quad.

1.Position one of the QSFP transceivers so that the key is oriented correctly to the port.

2.Using the tab, insert the transceiver into the port until it is firmly seated. You can feel a small click when it completely seats.

Transceivers are keyed so that they can only be inserted with the correct orientation. If a transceiver does not slide in easily, ensure that it is correctly oriented.

When the transceiver is correctly seated, the status LED will turn solid amber.

3.Remove the protective plug from the QSFP transceiver and the protective cap from the special QSFP cable and insert it into the transceiver until it is firmly seated.

The cables are also keyed to fit into the transceivers correctly.

When the cable is correctly seated, the status LED will change from amber to green.

4.Repeat step 1 through step 3 for the remaining QSFP ports.

5.Organize the cables. Refer to “Managing cables.”

Managing cables

Cables can be organized and managed in a variety of ways; for example, using cable channels on the port sides of the rack or patch panels to minimize cable management. With the horizontal orientation of the line cards in the Brocade VDX 8770-4, a pair of vertical cable management finger assemblies have been provided to keep the cables from hanging down in front of other modules.

Following is a list of recommendations:

Brocade VDX 8770-4 QuickStart Guide

31 of 32

Publication Number: 53-1002554-01

 

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Brocade VDX Brocade Communications Systems, Incorporated This guide Introduction Installation tasks, time, and items requiredAdministrator’s Guide Safety noticesBrocade VDX 8770-4, port side ESD precautionsBrocade VDX 8770-4, nonport side Port side of the Brocade VDX 8770-4 sample configurationItems included with the Brocade VDX Brocade VDX 8770-4 QuickStart Guide this publication Preparing for the Brocade VDX 8770-4 installationPower specifications Power specifications Environmental requirements Switch slots Unpacking and installing the Brocade VDXInserting a management module Port numberingInserting a management module Inserting a switch fabric moduleInserting a line card Inserting a switch fabric moduleInserting a line card 48x10G card shown Inserting power suppliesInserting a DC power supply Inserting an AC power supplyConnecting an AC power cord Providing power to the Brocade VDXConnecting a DC power cord Establishing a serial connection to the Brocade VDX Preparing to configure the Brocade VDXSerial cable pinouts Changing the RBridge ID Logging in to the serial console portSetting a static IP address Assigning permanent passwordsConfiguring the IP addresses Changing the default account passwordsEstablishing an Ethernet connection to the Brocade VDX Customizing a host name Customizing a switch nameTime synchronization Setting the date and timeSynchronizing local time using NTP Time zonesSetting the clock date and time Setting the time zoneSaving your changes Determining installed software licensesVerifying correct operation Backing up the configurationInstalling transceivers and attaching cables Connecting network devicesManaging cables Installing Qsfp transceivers and cablesCreating Brocade inter-switch link trunks

8770-4 specifications

Brocade Communications Systems, a leading provider of networking solutions, has made a notable impact in the realm of high-performance data center technologies. Among its various offerings, the Brocade 8770-4 chassis stands out as a versatile and powerful component designed for efficient network management and enhanced scalability.

At its core, the Brocade 8770-4 is built to support high-density environments, making it an ideal choice for organizations looking to manage increasing data traffic. The chassis can accommodate multiple line cards and services modules, allowing businesses to expand their network capabilities as needed. This modular architecture enables organizations to customize their configurations while ensuring future growth potential.

One of the main features of the Brocade 8770-4 is its exceptional performance capabilities. It supports a range of protocols and technologies, including Ethernet and Fibre Channel, to facilitate seamless communication across diverse environments. The device is equipped with advanced Layer 2 and Layer 3 switching functionalities, making it appropriate for both enterprise and service provider networks.

The architecture of the Brocade 8770-4 also prioritizes reliability. With redundant power supplies and cooling systems, it ensures uninterrupted service, even during critical operations. This high availability is particularly crucial for businesses that rely on constant connectivity and minimal downtime.

Another standout characteristic of the 8770-4 is its integration with innovative management and automation tools. The chassis supports advanced features like network virtualization and automation capabilities, enabling administrators to streamline operations and optimize resource utilization. This results in reduced operational costs and heightened efficiency, allowing IT teams to focus on strategic initiatives rather than routine maintenance.

Furthermore, the Brocade 8770-4 is designed with security in mind. Its built-in features include comprehensive access control lists and encryption capabilities to safeguard sensitive data flowing through the network. By maintaining rigorous security standards, organizations can protect themselves against potential threats while ensuring compliance with industry regulations.

In conclusion, the Brocade Communications Systems 8770-4 chassis is a robust solution for modern network demands. With its modular design, strong performance metrics, high availability features, and integrated management tools, it provides a flexible and scalable platform ideal for evolving connectivity needs across various sectors. As businesses continue to expand their digital operations, technologies like the 8770-4 will play a pivotal role in driving network efficiency and innovation.
Top Page Image Contents