Brocade Communications Systems 8770-4 quick start Power specifications

Page 10

2.Ensure that dedicated electrical branch circuits with the following characteristics are available:

•Up to four dedicated fused 200–240 VAC, 50–60 Hz feeds or -48 VDC (one per power supply)

•One cable for each power supply

CAUTION

Use a separate branch circuit for each AC power cord for redundancy in case one of the circuits fails.

•Protected by a circuit breaker in accordance with local electrical codes

•Supply circuit, line fusing, and wire size adequate to the electrical rating on the switch nameplate

•Location close to the switch and easily accessible

•Grounded outlets installed by a licensed electrician and compatible with the power cords

DANGER

If the installation requires a different power cord than the one supplied with the switch, make sure you use a power cord displaying the mark of the safety agency that defines the regulations for power cords in your country. The mark is your assurance that the power cord can be used safely with the switch.

3.Plan for cable management before installing the switch.

Cables can be managed in a variety of ways, such as by routing cables below the switch, to either side of the switch, through cable channels on the sides of the rack, or by using patch panels.

4.Ensure that the following items are available for configuration of the Brocade VDX 8770-4:

•Workstation with an installed terminal emulator, such as HyperTerminal

•Console (serial) cable (provided)

•Ethernet cables (not provided)

•Either access to an FTP server or a Brocade USB device for backing up the switch configuration or collecting supportsave output data (optional)

•Transceivers (copper and optical) and compatible cables and direct-attach cables if needed

5.Ensure that the air intake and exhaust vents have a minimum of 5.1 cm (2 in.) of airspace.

6.Ensure that the air temperature on the air intake side is less than 40°C (104°F) during operation.

Power specifications

Power for the Brocade VDX 8770-4 can be supplied with either AC- or DC-based 3000 watt power supplies. The Brocade VDX 8770-4 has room for up to four power supplies.

Table 2 shows the basic power specifications for each power supply.

10 of 32

Brocade VDX 8770-4 QuickStart Guide

 

Publication Number: 53-1002554-01

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Brocade VDX Brocade Communications Systems, Incorporated This guide Installation tasks, time, and items required IntroductionSafety notices Administrator’s GuideESD precautions Brocade VDX 8770-4, port sidePort side of the Brocade VDX 8770-4 sample configuration Brocade VDX 8770-4, nonport sideItems included with the Brocade VDX Preparing for the Brocade VDX 8770-4 installation Brocade VDX 8770-4 QuickStart Guide this publicationPower specifications Power specifications Environmental requirements Unpacking and installing the Brocade VDX Switch slotsPort numbering Inserting a management moduleInserting a switch fabric module Inserting a management moduleInserting a switch fabric module Inserting a line cardInserting power supplies Inserting a line card 48x10G card shownInserting an AC power supply Inserting a DC power supplyConnecting an AC power cord Providing power to the Brocade VDXConnecting a DC power cord Preparing to configure the Brocade VDX Establishing a serial connection to the Brocade VDXSerial cable pinouts Logging in to the serial console port Changing the RBridge IDChanging the default account passwords Assigning permanent passwordsConfiguring the IP addresses Setting a static IP addressEstablishing an Ethernet connection to the Brocade VDX Customizing a switch name Customizing a host nameTime zones Setting the date and timeSynchronizing local time using NTP Time synchronizationSetting the time zone Setting the clock date and timeDetermining installed software licenses Saving your changesBacking up the configuration Verifying correct operationConnecting network devices Installing transceivers and attaching cablesInstalling Qsfp transceivers and cables Managing cablesCreating Brocade inter-switch link trunks

8770-4 specifications

Brocade Communications Systems, a leading provider of networking solutions, has made a notable impact in the realm of high-performance data center technologies. Among its various offerings, the Brocade 8770-4 chassis stands out as a versatile and powerful component designed for efficient network management and enhanced scalability.

At its core, the Brocade 8770-4 is built to support high-density environments, making it an ideal choice for organizations looking to manage increasing data traffic. The chassis can accommodate multiple line cards and services modules, allowing businesses to expand their network capabilities as needed. This modular architecture enables organizations to customize their configurations while ensuring future growth potential.

One of the main features of the Brocade 8770-4 is its exceptional performance capabilities. It supports a range of protocols and technologies, including Ethernet and Fibre Channel, to facilitate seamless communication across diverse environments. The device is equipped with advanced Layer 2 and Layer 3 switching functionalities, making it appropriate for both enterprise and service provider networks.

The architecture of the Brocade 8770-4 also prioritizes reliability. With redundant power supplies and cooling systems, it ensures uninterrupted service, even during critical operations. This high availability is particularly crucial for businesses that rely on constant connectivity and minimal downtime.

Another standout characteristic of the 8770-4 is its integration with innovative management and automation tools. The chassis supports advanced features like network virtualization and automation capabilities, enabling administrators to streamline operations and optimize resource utilization. This results in reduced operational costs and heightened efficiency, allowing IT teams to focus on strategic initiatives rather than routine maintenance.

Furthermore, the Brocade 8770-4 is designed with security in mind. Its built-in features include comprehensive access control lists and encryption capabilities to safeguard sensitive data flowing through the network. By maintaining rigorous security standards, organizations can protect themselves against potential threats while ensuring compliance with industry regulations.

In conclusion, the Brocade Communications Systems 8770-4 chassis is a robust solution for modern network demands. With its modular design, strong performance metrics, high availability features, and integrated management tools, it provides a flexible and scalable platform ideal for evolving connectivity needs across various sectors. As businesses continue to expand their digital operations, technologies like the 8770-4 will play a pivotal role in driving network efficiency and innovation.
Top Page Image Contents