Brocade Communications Systems 8770-4 quick start Inserting a switch fabric module

Page 15

FIGURE 5 Inserting a management module

Inserting a switch fabric module

For this procedure, refer to “ESD precautions” and Figure 6.

Complete the following steps to insert the SFM.

1.Unpack the new SFM and remove it from the anti-static bag.

2.Inspect the module for damage.

3.Remove the protective caps from the backplane connectors.

4.Unscrew the power enable pin, pull it outward, and move the slider toward the center of the module face.

5.Open the ejectors on the new SFM by rotating them toward the center of the module face. Orient the switch fabric module so that the ejectors are toward you.

6.Align the module pan with the guides in the slot. The first SFM ashould be installed in slot S1.

7.Push the SFM firmly into the slot.

8.Close the ejectors by rotating them away from the center of the SFM. The levering action of the ejectors seats the module in the slot.

9.Tighten the captive screws using the Phillips screwdriver.

10.Pull out the power enable pin and move the slider all the way to the right.

11.Screw in the power enable pin.

12.Tighten the screws on the slider.

Brocade VDX 8770-4 QuickStart Guide

15 of 32

Publication Number: 53-1002554-01

 

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Brocade VDX Brocade Communications Systems, Incorporated This guide Introduction Installation tasks, time, and items requiredAdministrator’s Guide Safety noticesBrocade VDX 8770-4, port side ESD precautionsBrocade VDX 8770-4, nonport side Port side of the Brocade VDX 8770-4 sample configurationItems included with the Brocade VDX Brocade VDX 8770-4 QuickStart Guide this publication Preparing for the Brocade VDX 8770-4 installationPower specifications Power specifications Environmental requirements Switch slots Unpacking and installing the Brocade VDXInserting a management module Port numberingInserting a management module Inserting a switch fabric moduleInserting a line card Inserting a switch fabric moduleInserting a line card 48x10G card shown Inserting power suppliesInserting a DC power supply Inserting an AC power supplyProviding power to the Brocade VDX Connecting an AC power cordConnecting a DC power cord Establishing a serial connection to the Brocade VDX Preparing to configure the Brocade VDXSerial cable pinouts Changing the RBridge ID Logging in to the serial console portSetting a static IP address Assigning permanent passwordsConfiguring the IP addresses Changing the default account passwordsEstablishing an Ethernet connection to the Brocade VDX Customizing a host name Customizing a switch nameTime synchronization Setting the date and timeSynchronizing local time using NTP Time zonesSetting the clock date and time Setting the time zoneSaving your changes Determining installed software licensesVerifying correct operation Backing up the configurationInstalling transceivers and attaching cables Connecting network devicesManaging cables Installing Qsfp transceivers and cablesCreating Brocade inter-switch link trunks

8770-4 specifications

Brocade Communications Systems, a leading provider of networking solutions, has made a notable impact in the realm of high-performance data center technologies. Among its various offerings, the Brocade 8770-4 chassis stands out as a versatile and powerful component designed for efficient network management and enhanced scalability.

At its core, the Brocade 8770-4 is built to support high-density environments, making it an ideal choice for organizations looking to manage increasing data traffic. The chassis can accommodate multiple line cards and services modules, allowing businesses to expand their network capabilities as needed. This modular architecture enables organizations to customize their configurations while ensuring future growth potential.

One of the main features of the Brocade 8770-4 is its exceptional performance capabilities. It supports a range of protocols and technologies, including Ethernet and Fibre Channel, to facilitate seamless communication across diverse environments. The device is equipped with advanced Layer 2 and Layer 3 switching functionalities, making it appropriate for both enterprise and service provider networks.

The architecture of the Brocade 8770-4 also prioritizes reliability. With redundant power supplies and cooling systems, it ensures uninterrupted service, even during critical operations. This high availability is particularly crucial for businesses that rely on constant connectivity and minimal downtime.

Another standout characteristic of the 8770-4 is its integration with innovative management and automation tools. The chassis supports advanced features like network virtualization and automation capabilities, enabling administrators to streamline operations and optimize resource utilization. This results in reduced operational costs and heightened efficiency, allowing IT teams to focus on strategic initiatives rather than routine maintenance.

Furthermore, the Brocade 8770-4 is designed with security in mind. Its built-in features include comprehensive access control lists and encryption capabilities to safeguard sensitive data flowing through the network. By maintaining rigorous security standards, organizations can protect themselves against potential threats while ensuring compliance with industry regulations.

In conclusion, the Brocade Communications Systems 8770-4 chassis is a robust solution for modern network demands. With its modular design, strong performance metrics, high availability features, and integrated management tools, it provides a flexible and scalable platform ideal for evolving connectivity needs across various sectors. As businesses continue to expand their digital operations, technologies like the 8770-4 will play a pivotal role in driving network efficiency and innovation.
Top Page Image Contents