Avenview C-EDID-RW specifications DIP Switch Configuration, Mode

1.8DIP Switch Configuration

1	2	Mode
OFF	OFF	Reserved mode
OFF	ON	Recording: Connect the monitor to the DVI monitor connector. Once the recording
		process is completed, C-EDID-RW has copied the EDID from the monitor into flash
		memory the green LED will turn off.
ON	ON	Writing Default: Write the default EDID into C-EDID-RW to replace the existing
		EDID in the C-EDID-RW. Once the writing process is completed the green LED will
		turn off.
ON	OFF	Connection Mode: Set DIP switches at this position before you connect your
		computer to the C-EDID-RW

To avoid initiating undesired errors during switching between modes (e.g. changing from Recording mode to Connection mode might overwrite the EDID of display in the C-EDID-RW by default EDID), please unplug the power cord before you change on of the above modes to another. Plug in the power cord after you have changed the position of the DIP Switch.

DO NOT plug DVDI cable into PC DVI connector when you are changing from one mode to another.

www.avenview.com 6