Avenview C-EDID-RW Regulatory Notices Federal Communications Commission FCC, Introduction

1.3Regulatory Notices Federal Communications Commission (FCC)

This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

Any changes or modifications made to this equipment may void the user’s authority to operate this equipment.

1.4Introduction

Avenview C-EDID-RW can emulate the EDID (Extended Display Identification Data) information. It stores and

recalls a default EDID setting in non-volatile memory allowing your computer boot directly from EDID

Reader/Writer. It can also read and store the EDID of your display and even let you modify the EDID and

upload the modified EDID to displays.

-Keeps computers from deactivating inactive DVI port

-Reads and remembers the EDID of displays

-Writes EDIDs into the EDID Reader / Writer or the displays

-Default EDID built-in

-No power required after initial programming

-Maintains DVI video resolution

-Easy configuration

1.5Package Contents

Before you start the installation of the converter, please check the package contents.

-	C-EDID-RW	x 1
- Power Adapter (+5VDC, 2A)		x1
-	DVDI M-M 6 foot cable (optional)	x1
-	User’s Manual	x1

1.6Before Installation

∙Put the product in an even and stable location. If the product falls down or drops, it may cause an injury or malfunction.

∙Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high humidity.

∙Use the DC power adapter with correct specifications. If inappropriate power supply is used then it may cause a fire.

∙Do not twist or pull by force ends of the optical cable. It can cause malfunction.

www.avenview.com 4