Philips MCM276R Troubleshooting, Problem, Solution, Check the speaker connections and location

Page 30

English

Troubleshooting

WARNING

Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock.

If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help.

Problem

“NO DISC” is displayed.

Some files on the USB device are not displayed.

Radio reception is poor.

The system does not react when buttons are pressed.

Sound cannot be heard or is of poor quality.

The left and right sound outputs are reversed.

Solution

✔Insert a disc.

✔Wait until the moisture condensation at the lens has cleared.

✔Replace or clean the disc, see “Maintenance”.

✔Use a finalised CD-RW or a correct MP3/WMA -CD format disc.

✔Check if the number of folders exceeds 99 or the number of titles exceeds 999

✔If the signal is too weak, adjust the antenna or connect an external antenna for better reception.

✔Increase the distance between the Micro HiFi System and your TV or VCR.

✔Remove and reconnect the AC power plug and switch on the system again.

✔Adjust the volume.

✔Disconnect the headphones.

✔Check that the speakers are connected correctly.

✔Check if the stripped speaker wire is clamped.

✔Make sure the MP3-CD was recorded within 32~256 kbps bit rate with sampling frequencies at 48 kHz, 44.1 kHz or 32 kHz.

✔Check the speaker connections and location.

30

Image 30

Contents Necesita ayuda Inmediata? Need help fast? Besoin dune aideMCM276R Page Page Clean only with dry cloth Class II equipment symbolMaterials English FrançaisIndex Contents General Information Supplied accessoriesSafety Information Environmental InformationControls on the set illustrations Hearing SafetyControls Helpful hintsStandby or Eco Power mode press Remote controlVolume + Example ÉÅ, 4 , ¢Mounting stand onto the set Placing MCM276ROpen CLOSEç Mounting MCM276R onto wallsSpeaker InstallationRear connections Speaker connectionsFM antenna Connecting an additional applianceConnecting a USB device or memory Card For the devices with USB cableUsing AC power Connecting a docking cradleSee Dock optional for details To replace the remote controls’ Battery Using the remote controlSetting the clock PreparationBasic Functions Switching on/off the set and selecting functionsSwitching between Standby and ECO Power mode Auto-standbySound control Volume controlVolume adjustment Displaying the clockAbout MP3/ WMA Discs for playbackPlaying discs Supported formatsSelecting and searching Selecting a different trackFinding a passage within a track During playback Erasing the program MP3/WMA press ALBUM/ PresetProgramming tracks Press STANDBY-ON yRepeat TRACK- plays the current track continuously Different play modes REPEAT, ShuffleDisplay track information MP3/WMA only Shuffle plays all the tracks of the CD in random orderTuning to radio stations TunerProgramming radio stations Compatible USB mass storage devices Using a USB mass storage devicePlaying a USB mass storage device RootFor compatibility reasons, the album/track Selecting the correct dock adaptor Dock OptionalCompatible portable players = HDD1840/1850Setup Playing an iPod/GoGear portable playerHelpful hints Timer will not work at the set time if TimerSetting the timer Set will switch to Tuner source automatically ifSpecifications Cleaning the Cabinet Cleaning the disc lensCleaning Discs Solution TroubleshootingProblem Check the speaker connections and locationReplace the battery Buttons 2 , ¡1, 2 and Volume function onlyHow to mount your MCM276R onto walls AppendixPage Remarques relatives à la connexion dun iPod