Extron electronic 134xi, 130xi, 150xi Audio input, Audio throughput, Audio output, General

Page 29

Max. rise/fall time

3.5 nS

 

Polarity

RGBHV: when RGBHV is input,polarity

 

follows input; otherwise negative

 

RGBS, RGsB:

negative

Audio input

Number/type

1 PC level stereo, unbalanced

Connectors

1 3.5 mm stereo jack, 2 channel; tip (L),

 

ring (R), sleeve (ground)

Impedance

10 kohms, DC coupled

Minimum level

100mV

Maximum level

+8.5dBu,(unbalanced) @ stated %THD+N

Audio throughput

Gain

Unbalanced 0dB, balanced +6dB

Frequency response

±0.05dB @ 20 Hz to 20 kHz

THD + Noise

0.03% @ 1 kHz, 0.3% @ 20 kHz at rated

 

maximum output drive

S/N

>90dB, output 14dBu, balanced

Stereo channel separation

>95dB @ 1 kHz to 20 kHz

Audio output

Number/type

1 stereo (2 channel), balanced/

 

unbalanced

Connectors

3.5 mm stereo captive screw terminal, 5

 

conductor, for left and right output

Impedance

50 ohms, unbalanced, 100 ohms balanced

Gain error

±0.1dB channel to channel

Drive (600 ohm)

+14dBu, balanced at stated %THD+N

General

Power

100VAC to 240VAC, 50/60 Hz, 15 Watts,

 

internal, auto-switchable

MBC power jack

9.0VDC, 150 mA

Temperature/humidity

Storage -40° to +158°F (-40° to +70°C) /

 

10% to 90%, non-condensing

 

Operating +32° to +122°F (0° to +50°C) /

 

10% to 90%, non-condensing

Rack mount

No

Furniture mount

Yes, with optional kits, #70-077-01 and

 

#70-077-02

RGB 130xi , 134xi , 150xi Appendix

A-2

Image 29
Contents Universal Interfaces RGB 130xi , 134xiPrecautions Table of Contents RGB 130xi , 134xi One Introduction Two RGB 150xi front panel features Controls and InstallationRGB 150xi rear panel RGB 150xi rear panel featuresRGB 130xi front panel features Controls and Installation, cont’dRGB 130xi rear panel RGB 130xi rear panel featuresRGB 134xi front panel RGB 134xi front panel featuresRGB 134xi rear panel RGB 134xi rear panel featuresEasy setup procedure Attaching the under desk brackets Mounting the interfaceAttaching the through desk brackets Front Cabling13 RGB 150xi installation Unbalanced audio Connecting audio outputBalanced audio Appropriate end of each switch Setting the DIP switchesOhm input termination 15 Opening the interface cover Setting internal jumpersPins 2 and 3 connected Jumpers perform the following functions RGB 130xi , 134xi , 150xi Controls and Installation AAppendix Video throughput Specifications RGB 130xi, 134xi Video inputVideo output SyncAudio throughput Audio inputAudio output GeneralAppendix, cont’d Accessories and Part Numbers BNC cables RGB 130 xi , 134 xi , 150 xi Appendix RGB 130xi, 134xi, 150xi Appendix RGB 130 xi , 134 xi , 150 xi Appendix RGB 130xi, 134xi, 150xi Appendix FCC Class a Notice Extron’s Warranty Extron ELECTRONICS, Asia