Extron electronic HSA 402 INTERNATIONAL, HSA 400 user manual AAppendix a, Reference Information

Page 19

Maintenance and Modifications, cont’d

Adjusting the Top Surface Level

Level the top surface of the HSA as follows:

1.

If necessary, in order to view the surface and the underside

 

of the enclosure simultaneously, remove the surface mount

 

enclosure from the table. See “Removing and Replacing

 

the Enclosure”, steps 1 through 8.

2.

If necessary, close and latch the top panel.

3.

Slightly loosen the two latch locking screws (figure 3-8) on

 

the underside of the surface mount enclosure. These

 

screws lock the latch in place once it is adjusted.

Latch

Adjustment

Screw

Latch

Locking

Screws

Figure 3-8 — Adjust the top surface level

4.

Gently turn the adjustment screw on the rear of the surface

 

mount enclosure to raise or lower the top panel until it is

 

level with the flange. Turning the screw counterclockwise

 

raises the panel and turning it clockwise lowers the panel.

5.

Tighten the two latch locking screws on the underside of

 

the surface mount enclosure.

6.

If the surface mount enclosure was removed, reinstall it.

 

See “Removing and Replacing the Enclosure”, steps 11

 

through 17.

HSA 400/402 Series Surface Access Products

AAppendix A

Reference Information

Specifications

HSA Part Numbers

Included Parts

Routing Templates

Replacement Parts and Accessories

Interface Accessories

Top Plate Dimensions

3-10 HSA 400/402 Series • Maintenance and Modifications

Page 18 Page 20
Image 19
Page 18 Page 20
Contents HSA 400 & HSA 402 US/Domestic Precautions s Table of Contents Table of Contents, cont’d HSA 400/402 Series Surface Access ProductsIntroduction Features About the Hideaway Surface Access ProductsIntroduction Introduction, cont’d InstallationInstallation Overview InstallationPreparing the Routing Template Place the mounting template assembly on the table Template when the installation is complete. Save itFor installing other HSA products of the same size Other installation surface. Mark the locationCabling and Installing the AAPs Installation, cont’dMounting an AAP device to an HSA 400 US front panel Cabling the EnclosureOnly connectors 1A and 1B are present on the HSA Cable access holesBezels Installation, cont’d Routing the AAP CablesThree Maintenance and ModificationsReplacing an AAP Maintenance and ModificationsRemoving and Replacing the Enclosure Maintenance and Modifications, cont’d Replacing the BezelsMaintenance and Modifications, cont’d Hand on the enclosure to keep it from tipping When the HSA 400/402 is upside-down, the latchMay be ineffective. If the latch releases, the enclosure Will tip and could damage the flanged edges. Keep aReference Information AAppendix aReference Information SpecificationsIncluded Parts Replacement Parts and AccessoriesInterface Accessories Reference Information, cont’d HSA Part NumbersUS Model Reference Information, cont’d Top Plate Dimensions15.05 + 0.083 cm Reference Information, cont’dReference Information,Internationalc t’d Model Packaging for ShipmentFlanged edges of the top of the surface enclosure Are sharp when the HSA is removed from the tableExercise caution when handling to prevent personal Packaging for ShipmentPackaging for Shipment, cont’d Figure B-4 Installing protective stripsFigure B-6 HSA suspended in the foam Vertical Foams
Related manuals
Manual 28 pages 1.18 Kb

HSA 400 INTERNATIONAL, HSA 402 INTERNATIONAL, HSA 402, HSA 400 specifications

Extron is a well-known company specializing in the design and manufacturing of high-quality AV signal routing, distribution, and control solutions. Among its impressive lineup, the Extron HSA 400 and HSA 402 models, as well as the RGB 580xi AAP, stand out for their exceptional performance and versatility in audio and video integration.

Starting with the HSA 400 and HSA 402, these are high-performance audio switches designed for efficient audio management in professional AV environments. The HSA 400 supports up to four stereo audio input channels, while the HSA 402 expands this capability to two outputs. Both units feature advanced audio processing, allowing users to mix and switch audio sources seamlessly. They come equipped with Extron's patented audio algorithms, which help maintain high audio fidelity by eliminating noise and distortion during the switching process.

The HSA series also ensures user-friendly operation through their intuitive interface, which includes front panel controls and LED indicators for easy status monitoring. Additionally, they can be integrated into larger systems using various control options, including serial and Ethernet for automation versatility.

On the other hand, the RGB 580xi AAP is a state-of-the-art presentation switcher that provides comprehensive input options for a variety of signal sources, such as RGB, HDMI, and composite video. It is particularly notable for its ability to support high-resolution signals up to 1920x1200, catering to the needs of modern displays and projectors. The RGB 580xi AAP is designed with advanced scaling technology, ensuring that output images maintain quality and clarity, regardless of the source resolution.

This model also accommodates multiple output formats, enabling simultaneous connections to different display types. The integration of Extron's standout technologies like frame synchronizers ensures smooth transitions and real-time video switching without lag, making it an ideal choice for dynamic presentations.

Overall, Extron's HSA 400, HSA 402, and RGB 580xi AAP are exemplars of audio and video technology designed for professional environments. Their robust feature sets, including seamless switching, high-quality processing, versatile input/output options, and user-friendly interfaces, make them essential components for modern AV installations.
Top Page Image Contents