Extron electronic ISS 408 manual Command/response table for SIS commands cont’d

The X2

Programmer’s Guide, cont’d

Command/response table for SIS commands (cont’d)

Command	ASCII Command	Response	Additional description
	(host to switcher)	(switcher to host)
Input video type

Set video type		X1	*	X5	\
Example:	4*3\
View video type			\
		X1

X1	Typ	X5	Specify input			X1	video type.
4Typ3			Specify input 4 type as YUVp.
			Input		video type is				.
		X5		X1				X5

Scaler output video type

Set output resolution and rate		X6	*	X7	=	Rte	X6	*	X7	Command character is “equals”.
Example:	5*4=					Rte05*4				Set output to 1024x768 at 85 Hz.
View resolution and rate	=					Rte		*
							X6		X7

Color

Color adjustments are available only for interlaced component video (YUVi), S-video, and composite video inputs.

The X2 value specified is the output to which the adjusted input is switched.

Set a specific color value Increment color value Decrement color value View the color value

X2

X2

X2

X2

*X10 C

+C -C C

X2	Col	X10	Specify the color adjustment.
	Col		Increase the color setting by one.
X2		X10
	Col		Decrease the color setting by one.
X2		X10
			Show the color setting.
		X10

Tint

Tint adjustments are available only for S-video and composite video inputs. value specified is the output to which the adjusted input is switched.

Set a specific tint value Increment tint value Decrement tint value View the tint value

X2 * X11 T

X2 +T

X2 -T

X2 T

X2 Tin X11

X2 Tin X11

X2 Tin X11

X11

Specify the tint adjustment. Increase the tint setting by one. Decrease the tint setting by one. Show the tint setting.

Brightness

The

X2

value specified is the output to which the adjusted input is switched.

Set a specific brightness value

Increment brightness value Decrement brightness value View the brightness value

X2 * X12 Y

X2 +Y

X2 -Y

X2 Y

X2	Brt	X12	Specify the brightness
			adjustment.
	Brt		Increase the brightness.
X2		X12
	Brt		Decrease the brightness.
X2
		X12
			Show the brightness setting.
		X12

Contrast

The X2

value specified is the output to which the adjusted input is switched.

Set a specific contrast value Increment contrast value Decrement contrast value View the contrast value

X2

X2

X2

X2

*X12 ^

+^ -^

^

X2	Con	X12	Specify the contrast adjustment.
	Con		Increase the contrast.
X2		X12
	Con		Decrease the contrast.
X2		X12
			Show the contrast setting.
		X12

Horizontal size

Set a specific horizontal size Increase the horizontal size Decrease the horizontal size View the horizontal size

X2

X2

X2

X2

*X13 :

+: -:

:

X2	Hsz	X13	Specify the horizontal size.
	Hsz		Widen the picture.
X2		X13
	Hsz		Make the picture narrower.
X2		X13
			Show the horizontal size.
		X13

4-10 ISS 408 Integration Seamless Switcher • Programmer’s Guide