Extron electronic manual MAV 168/1616 video models, MAV 168/1616 audio models, All models

Page 14

Introduction, cont’d

MAV 168/1616 video models

Inputs — These switchers offer 16 RGsB, RsGsBs, HDTV, component video, S-video, or NTSC 3.58, NTSC 4.43, PAL, and SECAM composite video inputs on BNC connectors (video models).

Stereo audio can be balanced or unbalanced, on 3.5 mm, 5-pole captive screw terminals (audio models).

Outputs — 8 or 16 RGsB, RsGsBs, HDTV, component video, S-video, or NTSC 3.58, NTSC 4.43, PAL, and SECAM composite video outputs are available on BNC connectors (video models).

Stereo audio can be balanced or unbalanced, on 3.5 mm, 5-pole captive screw terminals (audio models).

Bandwidth — Bandwidth is a maximum of 150 MHz (-3dB), fully loaded. This high bandwidth allows the MAV switchers to switch everything from NTSC video to HDTV.

MAV 168/1616 audio models

Inputs — 16 stereo audio inputs, balanced or unbalanced, on 3.5 mm, 5-pole captive screw terminals.

Outputs — 8 or 16 stereo audio outputs, balanced or unbalanced, on 3.5 mm, 5-pole captive screw terminals.

Audio gain/attenuation — Users can set the input level of audio gain or attenuation (-15dB to +9dB) via the RS-232/RS-422 link or from the front panel. Individual input audio levels can be adjusted so there are no noticeable volume differences between sources (figure 1-5).

Audio follow — Audio can be switched with the corresponding video input, allowing any audio signal to be selected with any video signal simultaneously to one or all outputs in any combination. Audio follow switching can be done via front panel control or under RS-232/RS-422 remote.

Audio breakaway — Audio can be broken away from its corresponding video signal. Audio breakaway switching can be done via front panel control or under RS-232/RS-422 control.

All models

Operational flexibility — Operations such as input/output selection, setting of presets, and adjustment of audio levels can be performed on the front panel or over the RS-232/RS-422 link. The RS-232/RS-422 link allows remote control via a PC or control system.

•QuickSwitch Front Panel Controller (QS-FPC™) — The MAV series QS-FPC feature supports touch-of-a-button input and output selection, preset creation and selection, and audio gain and attenuation control.

•Windows-based control program — Extron’s Windows-based control program provides a versatile range of operational options with its graphical interface and drag-and-drop/point-and-click operation. The Windows-based control program also has an emulation mode that lets you create a switcher configuration file at the home office and then download it for use by the switcher on site.

•Simple Instruction Set (SIS™) — The remote control protocol uses Extron’s SIS for easy programming and operation.

1-6 MAV Series Switchers • Introduction

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Matrix Switchers MAV SeriesSicherheitsanleitungen Deutsch Safety Instructions EnglishConsignes de Sécurité Français Instrucciones de seguridad EspañolQuick Start MAV Series Switchers QS-1Quick Start MAV Series Switchers, cont’d Table of Contents Table of Contents, cont’d MAV Series Switchers Table of Contents Iii Iv MAV Series Switchers Table of Contents One MAV Series Switchers Introduction Introductiontroduction, cont’dTypical MAV 1616 component matrix switcher application Introduction, cont’d MAVFeatures MAV 128 RCA modelAll models MAV 168/1616 video modelsMAV 168/1616 audio models MAV Series Switchers Introduction Introduction, cont’d Two Mounting the Switcher Installationstallation, cont’dInstallation Overview MAV Series Switchers InstallationMAV 1616 component video matrix switcher with audio Video input and output connections video models only Installation, cont’dPower connection Audio input and output connections audio models only Audio input connectionsRS-232/422 connection External sync connectionMAV switcher Additional rear panel view11 MAV 168 composite video matrix switcher with audio Three Operationeration, cont’d Front Panel Controls and IndicatorsMAV Series Switchers Operation DefinitionsControl buttons and LEDs ControlsFront Panel Operations PowerOperation, cont’d Front panel I/O label windowsCreating a configuration Example 1 Creating a set of video and audio tiesExample 1 Creating a tie Example 2 Adding a tie to a set of video and audio tiesExample 3 Removing a tie from a set of video and audio ties Example 3 Selecting audio and selecting inputViewing a configuration Example 4 Viewing the current configuration Audio buttons Example 5 Muting and unmuting an output 12 Example 5, step D Muting and unmuting outputsExample 7 Recalling a preset Using presetsExample 6 Saving a preset Viewing and adjusting the audio level models with audio Example 8 Viewing and adjusting an audio level LED16 +8dB displayed on MAV 128 RCA System reset to factory defaults TroubleshootingExecutive mode front panel security lockout Plasma display S-video problemWorksheets Worksheet example 1 System equipmentWorksheet example 2 Daily configuration Worksheet example 3 Test configurationConfiguration worksheet Input sources Output destinationsOperation, cont’d Four MAV Series Switchers Programmer’s Guide Host-to-Switcher InstructionsSwitcher-Initiated Messages Programmer’ser’sGuide,Guidecont’dSwitcher Error Responses Using the Command/Response TableProgrammer’s Guide, cont’d Command/Response TableCommand Ascii Command Response Additional description Command/response table for SIS commands Cont’d Executive mode Five Using the software Matrix Switchers Control ProgramInstalling the software MatrixSoftware,cont’dExtron Matrix Switchers Control Program window blank Windows buttonsMatrix Software, cont’d Windows menusButton-Label Generator Using emulation modeUsing the help system Extron’s Button-Label Generator window AAppendix a Specificationsecifications, cont’d MAV Series Switchers SpecificationsMAV Series Switchers Specifications A-3 SyncSpecifications, cont’d Control/remote switcherPart Numbers MAV switcher part numbersOptional accessories CablesBNC-5 Mini HR Cable Assorted connectors BNC connectorsExtron Part BNC-4 Mini HR Cable Plenum BNC-5 Mini HR CableAppendixBB ReferenceInformation,co t’d Hardware ProceduresOpening the switcher Swapping the serial ports Closing the switcherMAV Series Switchers Reference Information Installing a firmware update Reference Information, cont’dButton Labels Replacing the AC fuseReference Information, cont’d MAV Series Switchers Reference Information Reference Information, cont’d Extron’s Warranty Extron Electronics, USA
Related manuals
Manual 21 pages 49.15 Kb

MAV specifications

Extron electronics are renowned for their cutting-edge technology in the realm of AV systems and distribution solutions. Among its notable products, the MAV series stands out as an advanced tool for managing audio/video signals across various applications. The Extron MAV, or Multi-Format Audio/Video Switcher, provides a seamless approach to switching between multiple sources effortlessly, making it an integral component in modern AV setups.

One of the main features of the Extron MAV is its multi-format switching capability. It supports a wide variety of video signals, including HDMI, VGA, display port, and composite video, allowing users to connect different devices without worrying about compatibility issues. This versatility is particularly beneficial in environments such as classrooms, conference rooms, and auditoriums, where multiple input sources like laptops, projectors, and other multimedia devices are commonly used.

Another significant characteristic of the MAV series is its robust audio integration. The MAV not only switches video signals but also routes audio through its built-in audio switcher. This feature simplifies the workflow by allowing users to manage audio from the same interface, ensuring synchronized audio and video output. The device also supports advanced audio features, including audio de-embedding and analog audio outputs, making it suitable for complex AV systems.

The MAV employs Extron's proprietary technologies to enhance signal integrity. For instance, it adopts advanced signal processing to prevent degradation of video quality, maintaining a clear and crisp image even over long distances. The incorporation of automatic switching allows for a quick transition when the active source changes, ensuring minimal downtime during presentations.

The intuitive user interface of the MAV is another defining characteristic. It can be controlled through a dedicated touchscreen or via a web-based interface, providing flexibility in how users interact with the system. Additionally, the MAV can be integrated with control systems like Extron’s Global Scripter, enabling customized automation and enhanced interactivity.

In summary, the Extron MAV exemplifies advanced AV technology with its multi-format switching, integrated audio management, superior signal processing, and user-friendly interface. Its adaptability and robust performance make it an essential tool for professional AV environments, catering to a broad range of applications and ensuring a seamless experience for users and audiences alike. Whether in educational settings, corporate environments, or entertainment venues, the Extron MAV consistently delivers high-quality audio and video performance.
Top Page Image Contents