Extron electronic MVX VGA A setup guide Front Panel Operation, cont’d Saving or Recalling a Preset

Front Panel Operation, cont’d

Saving or Recalling a Preset

1. Save a preset — Press and hold the Preset button until it flashes.

Recall a preset — Press and release the Preset button.

Save a	Press and hold.
preset	2 seconds
PRESET	Preset LED blinks.	PRESET
Recall a	Press and release.
preset	Preset LED lights.
PRESET		PRESET

All input and output buttons with assigned presets light.

The configuration data at assigned preset locations will be overwritten.

1 2 3 4

2.	Press and release the desired input button.
	1	The LED blinks to indicate that this preset
		is selected.
				The Enter LED
				blinks to indicate
				the need to save or
			ENTER recall the preset.
3.	Press and release the Enter button.

Setting the Front Panel Locks (Executive Modes)

The matrix switcher has three levels of front panel security lock that limit the operation of the switcher from the front panel. The three levels are:

•Lock mode 0 — The front panel is completely unlocked.

•Lock mode 1 — All changes are locked from the front panel (except for setting Lock mode 2). Some functions can be viewed.

•Lock mode 2 — Basic functions are unlocked. Advanced features are locked and can be viewed only.

Basic features consist of:

m Making ties

m Saving and recalling presets

m Setting input audio gain and attenuation m Changing Lock modes

Advanced features consist of:

m Setting video and audio output mutes m Setting audio output volume

NThe switcher is shipped from the factory in Lock mode 2.

NFor a complete list of advanced features, refer to the MVX VGA A User’s Manual, available on the Extron DVD or at www.extron.com.

Selecting Lock mode 2 or toggling between mode 2 and mode 0

NIf the switcher is in Lock mode 0 or mode 1, this procedure selects mode 2.

If the switcher is in Lock mode 2, this action selects mode 0 (unlocks the switcher).

Toggle the lock on and off by pressing and holding the Enter button, the Video button, and the Audio button for approximately 2 seconds.

Press and hold the Enter, Video, and Audio buttons simultaneously to turn on Lock mode 2 or to toggle between mode 2 and mode 0.

	I/O			I/O
			2 seconds
ENTER	VIDEO	AUDIO	ENTER	VIDEO	AUDIO

The Enter, Video, and Audio LEDs blink twice to indicate the mode change. Release the buttons.

3-4 MVX VGA A Matrix Switchers • Front Panel Operation

MVX VGA A Matrix Switchers • Front Panel Operation 3-5

Refer also to the MVX VGA A User’s Manual at www.extron.com. Refer also to the MVX VGA A User’s Manual at www.extron.com.