Extron electronic MVX VGA A Front Panel Operation, cont’d, Viewing Ties and Muting Outputs

Page 11
Front Panel Operation, cont’d

Front Panel Operation, cont’d

Selecting Lock mode 2 or toggling between mode 2 and mode 1

NIf the switcher is in Lock mode 0 or mode 1, this procedure selects mode 2.

If the switcher is in Lock mode 2, this action selects mode 1.

Toggle the lock on and off by pressing and holding the Video button and the Audio button for approximately 2 seconds.

Press and hold the Video and Audio buttons simultaneously to turn on Lock mode 2 or to toggle between mode 2 and mode 1.

I/O

 

I/O

 

2 seconds

The Video and Audio

 

LEDs blink twice to

 

 

 

 

indicate the mode change.

 

 

Release the buttons.

VIDEO AUDIO

 

VIDEO AUDIO

Viewing and Adjusting the Input Audio Level and Output Volume

1.

Press and hold the Audio button until it flashes.

 

 

 

 

Audio LED blinks.

 

 

 

 

Hold

 

 

 

 

 

 

 

 

 

 

 

AUDIO

 

2 seconds

AUDIO

 

2.

Press an input button (for input level) or output button (for

 

volume). Refer to the MVX VGA A Switcher User's Manual,

 

chapter 3, “Operation”, to read the displayed value.

5Press an input button to adjust gain/attenuation. Viewing and Adjusting the Input Audio Level and Output Volume - or -

Press an output button to adjust the output volume.

Output LEDs display gain/attenuation.

- or -

Input LEDs display

1

2

3

4

output volume level.

 

Viewing Ties (and Muting Outputs)

1. Press the View button. Output LEDs light for outputs that have no ties established.

NIf an output LED blinks, that output is muted.

2.

Press an input button. The LEDs for all tied outputs light.

3.

Press an output button. The LEDs for the tied input and

 

all tied outputs light.

4.

If you want to toggle a mute on and off, press and hold

 

the output button for 2 seconds.

5.

Press the View button. All input and output LEDs return

 

to an unlit state.

3. Increase/decrease the level or volume by pressing the Esc (>) and View (<) buttons.

OUTPUTS

Viewing Ties (and Muting Outputs) button decreases the level.

If you want to toggle a mute on and off, press and hold button increases the level.

VIEW ESC

4. Press and release the Audio button to exit.

3-6 MVX VGA A Matrix Switchers • Front Panel Operation

MVX VGA A Matrix Switchers • Front Panel Operation

3-7

Refer also to the MVX VGA A User’s Manual at www.extron.com.

Refer also to the MVX VGA A User’s Manual at www.extron.com.

Image 11
Contents Matrix switcher part numbers MVX Matrix Switcher Part NumbersComputer Video VGA and Audio Matrix Switchers Setup GuideUSA, Canada, South America PrecautionsExtron Warranty Safety Instructions EnglishFCC Class A Notice MVX VGA A Matrix Switchers Precautions and Listings安全须知 中文 Viewing and Adjusting the Input Audio Level and Table of ContentsChapter Three Front Panel Operation Setting the Front Panel Locks Executive ModesChapter1One MVX VGA A Matrix SwitchersTable of Contents, cont’d About this Manual About the Matrix SwitchersChapter2Two InstallationAbout the Matrix Switchers Rear Panel Installation Features Front Panel Configuration PortRS-422 Function InstallationRear Panel Installation Features Pin RS-232 FunctionFront Panel Operation Installation, cont’d Front Panel Configuration PortChapter3Three MVX VGA A Matrix Switchers Front Panel Operation Front Panel OperationCreating a Tie Press and release the Enter button. All button indicatorsSelecting Lock mode 2 or toggling between mode 2 and mode Front Panel Operation, cont’d Saving or Recalling a PresetSetting the Front Panel Locks Executive Modes If you want to toggle a mute on and off , press and hold Viewing and Adjusting the Input Audio Level and Output VolumeFront Panel Operation, cont’d Viewing Ties and Muting OutputsButton Label Generator Program Remote ControlSelected SIS Commands Installing and Starting the Control Program Chapter4FourSelected SIS Commands Remote ControlResponse CommandASCII command A Matrix Switchers Remote ControlE VM Control, cont’dEX1@CV Remote Controlcont’d VX*XXAX*XX X1Installing the program Installing and Starting the Control ProgramStarting the program Remote Control, cont’dButton-Label Generator Program 4-10 MVX VGA A Matrix Switchers Remote Control
Related manuals
Manual 107 pages 1.84 Kb