Front Panel Operation
|
|
|
|
|
|
|
| INPUTS |
|
|
|
|
|
|
|
|
|
|
|
|
|
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| CONTROL |
|
| I/O | |
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | ENTER | PRESET | VIEW | ESC | VIDEO | AUDIO |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| CONFIG |
|
|
|
|
|
|
|
|
|
|
|
| OUTPUTS |
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| MVX SERIES | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| VGA MATRIX SWITCHER WITH ADPS™ | ||
1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 2 | 3 | 4 | 5 | 6 | 7 | 8 |
NOn some MVX switchers, the video selection button is labeled “RGBHV” rather than “Video”.
NThe front panel controls and indicators have numerous functions that are beyond the scope of this setup guide. Refer to the MVX VGA A Switcher User's Manual, chapter 3, “Operation” for full details.
aInput buttons and LEDs — Buttons select inputs for front panel operations. LEDs identify selected inputs and indicate other miscellaneous displays.
bOutput buttons and LEDs — Buttons select outputs for front panel operations. LEDs identify selected outputs and indicate other miscellaneous displays.
cEnter button and LED — Button saves changes that you make on the front panel. LED indicates that a pending change needs to be saved.
dPreset button and LED — Button selects modes in which you can save and recall presets. LED indicates the preset mode.
eView (<) button and LED — Button selects a View mode, in which you can view the current configuration without making inadvertent changes and also mute and unmute outputs. Button also can be used to decrease audio levels. LED identifies view mode.
fEsc (>) button and LED — Button cancels operations or selections in progress and resets the front panel button indicators. Button also can be used to increase audio level. LED flashes once to indicate that the escape function has been activated.
gVideo button and LED — Button selects video for creation of ties. LED indicates that video is selected for tie creation.
hAudio button and LED — Button selects audio for creation of ties. Button also selects Audio mode, in which you can adjust audio levels. LED indicates that audio is selected for tie creation. LED also indicates Audio mode is selected.
Creating a Tie
1. | Press and release the Esc button to clear any button |
| indicators that may be lit. |
Press the Esc button to clear all selections.
| ESC |
|
|
|
|
| The LED blinks once. | |
2. | Press and release the Video and/or Audio I/O button(s) to | |
| select or deselect video and/or audio as desired. | |
NAudio or video can be broken away (tied by itself) by selecting only the Video button or only the Audio button.
| Lit when selected. |
|
|
| I/O |
|
| Lit when selected. | ||
|
|
|
|
|
| |||||
|
|
|
|
| ||||||
|
|
|
| |||||||
| Off when deselected. |
|
|
|
| Off when deselected. | ||||
|
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| VIDEO | AUDIO | |||
3. | Press and release the desired input button. | |||||||||
|
|
|
|
| ||||||
| The input LED | 5 |
|
|
| |||||
| lights to indicate |
|
|
|
| |||||
| the selection. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
| ||||||
4. | Press and release the desired output button(s). | |||||||||
Output LEDs blink to indicate a potential tie.
| 3 | 4 | 8 | ENTER |
|
| Enter LED blinks to indicate the | ||
|
|
| need to confirm the change. | |
5. | Press and release the Enter button. All button indicators | |||
| turn off. |
|
|
|
MVX VGA A Matrix Switchers • Front Panel Operation |
Refer also to the MVX VGA A User’s Manual at www.extron.com. | Refer also to the MVX VGA A User’s Manual at www.extron.com. |