Extron electronic HSA 402, HSA 400 user manual Installation, cont’d Routing the AAP Cables, Bezels

Page 13

Installation, cont’d

Routing the AAP Cables

The AAP cables must have freedom of movement to permit opening and closing the surface mount enclosure. At the same time, they need to be restrained to prevent their rubbing against the edges of the enclosure cable access hole in the underside of the surface mount enclosure. Rubbing against the cable access hole edges can damage the cables. Route and secure the AAP cables as follows:

1.

Open the top panel to extend the AAP cables to their

 

maximum pull.

2.

Experiment with AAP cable positioning to ensure that the

 

cables do not rub against the edges of the AAP cable hole

 

and to ensure that the cable pull does not restrict the

 

movement of the top panel. Figure 2-9 shows the cables

 

routed to the side, which proved effective in tests at

 

Extron.

3.Secure the AAP cables to the tie-down holes with tie wraps in the clamshell and the enclosure in the locations shown on figure 2-9.

Rear View into HSA and Clamshell

Secure the AAP cables at the circled locations.

Figure 2-9 — HSA 402 AAP cable routing, rear view

Bezels

The HSA ships with RJ-45/RJ-11 connector bezel plug-ins in a variety of colors and a black, blank bezel.

Bezel

To change to a different color connector bezel, or if a connector is not needed or desired, replace the connector bezel plug-in on the front panel with a bezel of a different color or a blank plug-in. See Replacing the Bezels in chapter 3.

If no connector is desired, snap the interior RJ-45 connector onto the rear of the blank bezel plug-in to hold it conveniently out of the way. Retain the removed connector bezel plug-in for any possible later use.

2-12 HSA 400/402 Series • Installation

HSA 400/402 Series • Installation 2-13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents User’s Manual Extron’s Warranty PrecautionsPage Table of Contents Table of Contents, cont’d HSA 400/402 Series Surface Access ProductsOne IntroductionFeatures About the Hideaway Surface Access ProductsIntroduction Two InstallationIntroduction, cont’d Installation Overview InstallationPreparing the Routing Template For installing other HSA products of the same size Template when the installation is complete. Save itOther installation surface. Mark the location Place the mounting template assembly on the tableCabling and Installing the AAPs Installation, cont’dMounting an AAP device to an HSA 400 US front panel Cabling the EnclosureAn RJ-11 plug can be connected to the RJ-45 jack Only connectors 1A and 1B are present on the HSABezels Installation, cont’d Routing the AAP CablesThree Maintenance and ModificationsReplacing an AAP Maintenance and ModificationsRemoving and Replacing the Enclosure Maintenance and Modifications, cont’d Replacing the BezelsMaintenance and Modifications, cont’d May be ineffective. If the latch releases, When the HSA 400/402 is upside-down, the latchEnclosure will tip and could damage the flanged Edges. Keep a hand on the enclosure to keep it fromReference Information AAppendix aReference Information SpecificationsInterface Accessories Replacement Parts and AccessoriesReference Information, cont’d HSA Part Numbers Included PartsUS Model Reference Information, cont’d Top Plate Dimensions15.05 + 0.083 cm Reference Information, cont’dPackaging for Shipment AppendixBBReference Information,Internationalc t’d Model Exercise caution when handling to prevent personal Are sharp when the HSA is removed from the tablePackaging for Shipment InjuryPackaging for Shipment, cont’d Figure B-4 Installing protective stripsFigure B-6 HSA suspended in the foam Vertical Foams
Related manuals
Manual 28 pages 13.51 Kb

RGB 580xi AAP, HSA 402, HSA 400 specifications

Extron is a well-known company specializing in the design and manufacturing of high-quality AV signal routing, distribution, and control solutions. Among its impressive lineup, the Extron HSA 400 and HSA 402 models, as well as the RGB 580xi AAP, stand out for their exceptional performance and versatility in audio and video integration.

Starting with the HSA 400 and HSA 402, these are high-performance audio switches designed for efficient audio management in professional AV environments. The HSA 400 supports up to four stereo audio input channels, while the HSA 402 expands this capability to two outputs. Both units feature advanced audio processing, allowing users to mix and switch audio sources seamlessly. They come equipped with Extron's patented audio algorithms, which help maintain high audio fidelity by eliminating noise and distortion during the switching process.

The HSA series also ensures user-friendly operation through their intuitive interface, which includes front panel controls and LED indicators for easy status monitoring. Additionally, they can be integrated into larger systems using various control options, including serial and Ethernet for automation versatility.

On the other hand, the RGB 580xi AAP is a state-of-the-art presentation switcher that provides comprehensive input options for a variety of signal sources, such as RGB, HDMI, and composite video. It is particularly notable for its ability to support high-resolution signals up to 1920x1200, catering to the needs of modern displays and projectors. The RGB 580xi AAP is designed with advanced scaling technology, ensuring that output images maintain quality and clarity, regardless of the source resolution.

This model also accommodates multiple output formats, enabling simultaneous connections to different display types. The integration of Extron's standout technologies like frame synchronizers ensures smooth transitions and real-time video switching without lag, making it an ideal choice for dynamic presentations.

Overall, Extron's HSA 400, HSA 402, and RGB 580xi AAP are exemplars of audio and video technology designed for professional environments. Their robust feature sets, including seamless switching, high-quality processing, versatile input/output options, and user-friendly interfaces, make them essential components for modern AV installations.
Top Page Image Contents