Extron electronic HSA 402, HSA 400, RGB 580xi AAP user manual Packaging for Shipment, Injury

Page 25

Packaging for Shipment

The HSA’s ultra-fine machined surfaces and moving parts make them vulnerable to damage caused by mishandling during shipment if they are improperly packaged. If, for any reason, you need to return an HSA to Extron, first contact Extron to obtain a return kit. The return kit, which reduces the chances of damage during shipment, includes a sturdy shipping carton and foam cut to fit the HSA (figure B-1).

Figure B-1 — HSA 400/402 return kit

Package an HSA for shipment as follows:

1. Contact the Extron S3 Sales & Technical Support Hotline to obtain a return kit. Extron will send the return kit to the location you specify.

 

 

 

 

The flanged edges of the top of the surface enclosure

 

 

 

 

are sharp when the HSA is removed from the table.

 

 

 

 

Exercise caution when handling to prevent personal

 

 

 

 

injury.

 

 

The flanged edges of the top of the surface enclosure

CAUTION

 

 

 

 

 

are bevelled to an ultra-fine thickness of less than

0.04(4/100)" (approximately 1 mm). These edges are soft and can be easily nicked or bent. Exercise caution when handling and mounting the enclosure. Mishandling can damage the appearance of the enclosure.

2.

Disconnect all cables and remove the HSA from the table

 

or desk. See “Removing and Replacing the Enclosure”,

 

steps 1 through 8, in chapter 3, “Maintenance and

 

Modifications”.

3.

Remove any AAPs by unscrewing the nuts on the rear of

 

the panel that fasten the plates to the faceplate (figure B-2).

B-2 HSA 400/402 Series • Packaging for Shipment

#4-40 Nut with Captive Washer

125

 

5

 

0/60

Hz0.

 

 

5A

Front Panel

HSA 400

 

 

 

 

 

Cable

 

IN

 

 

 

 

 

S PU

 

 

 

 

 

EL T

 

 

 

 

 

EC

 

 

A

 

T CO

 

 

 

MP

 

 

UD

 

 

U

 

IO

 

 

 

TER

 

 

 

 

 

 

RGB 580xi SI AAP

Figure B-2 — Removing an AAP device

4.

Place the enclosure upside-down on a horizontal surface.

 

To protect the finish, place the enclosure on a soft cloth or

 

rubber mat.

 

 

 

 

5.

Bolt the clamshell to the enclosure with the two bolts and

 

flat washers that are included in the return kit (figure B-3).

Figure B-3 — Attaching the clamshell

HSA 400/402 Series • Packaging for Shipment

B-3

Image 25
Contents User’s Manual Extron’s Warranty PrecautionsPage Table of Contents Table of Contents, cont’d HSA 400/402 Series Surface Access ProductsOne IntroductionFeatures About the Hideaway Surface Access ProductsIntroduction Two InstallationIntroduction, cont’d Installation Overview InstallationPreparing the Routing Template For installing other HSA products of the same size Template when the installation is complete. Save itOther installation surface. Mark the location Place the mounting template assembly on the tableCabling and Installing the AAPs Installation, cont’dMounting an AAP device to an HSA 400 US front panel Cabling the EnclosureAn RJ-11 plug can be connected to the RJ-45 jack Only connectors 1A and 1B are present on the HSABezels Installation, cont’d Routing the AAP CablesThree Maintenance and ModificationsReplacing an AAP Maintenance and ModificationsRemoving and Replacing the Enclosure Maintenance and Modifications, cont’d Replacing the BezelsMaintenance and Modifications, cont’d May be ineffective. If the latch releases, When the HSA 400/402 is upside-down, the latchEnclosure will tip and could damage the flanged Edges. Keep a hand on the enclosure to keep it fromReference Information AAppendix aReference Information SpecificationsInterface Accessories Replacement Parts and AccessoriesReference Information, cont’d HSA Part Numbers Included PartsUS Model Reference Information, cont’d Top Plate Dimensions15.05 + 0.083 cm Reference Information, cont’dPackaging for Shipment AppendixBBReference Information,Internationalc t’d Model Exercise caution when handling to prevent personal Are sharp when the HSA is removed from the tablePackaging for Shipment InjuryPackaging for Shipment, cont’d Figure B-4 Installing protective stripsFigure B-6 HSA suspended in the foam Vertical Foams
Related manuals
Manual 28 pages 13.51 Kb

RGB 580xi AAP, HSA 402, HSA 400 specifications

Extron is a well-known company specializing in the design and manufacturing of high-quality AV signal routing, distribution, and control solutions. Among its impressive lineup, the Extron HSA 400 and HSA 402 models, as well as the RGB 580xi AAP, stand out for their exceptional performance and versatility in audio and video integration.

Starting with the HSA 400 and HSA 402, these are high-performance audio switches designed for efficient audio management in professional AV environments. The HSA 400 supports up to four stereo audio input channels, while the HSA 402 expands this capability to two outputs. Both units feature advanced audio processing, allowing users to mix and switch audio sources seamlessly. They come equipped with Extron's patented audio algorithms, which help maintain high audio fidelity by eliminating noise and distortion during the switching process.

The HSA series also ensures user-friendly operation through their intuitive interface, which includes front panel controls and LED indicators for easy status monitoring. Additionally, they can be integrated into larger systems using various control options, including serial and Ethernet for automation versatility.

On the other hand, the RGB 580xi AAP is a state-of-the-art presentation switcher that provides comprehensive input options for a variety of signal sources, such as RGB, HDMI, and composite video. It is particularly notable for its ability to support high-resolution signals up to 1920x1200, catering to the needs of modern displays and projectors. The RGB 580xi AAP is designed with advanced scaling technology, ensuring that output images maintain quality and clarity, regardless of the source resolution.

This model also accommodates multiple output formats, enabling simultaneous connections to different display types. The integration of Extron's standout technologies like frame synchronizers ensures smooth transitions and real-time video switching without lag, making it an ideal choice for dynamic presentations.

Overall, Extron's HSA 400, HSA 402, and RGB 580xi AAP are exemplars of audio and video technology designed for professional environments. Their robust feature sets, including seamless switching, high-quality processing, versatile input/output options, and user-friendly interfaces, make them essential components for modern AV installations.