Through-desk mounting

Installation and Operation, cont’d

1.	If rubber feet were installed on the interface, remove them.
2.	Insert the machine screws (provided in the mounting kit)
	through the slots in the optional through-desk mounting
	brackets (part #70-077-02), and loosely attach the brackets
	to the interface.
3.	Hold the interface with attached brackets against the
	underside of the desk/table. With a soft pencil mark the
	location of holes for screws on the desk. Mark the
	opening, approximately 1.8” x 8.9” ( 4.6 cm x 22.6 cm).
4.	Cut out the material from the installation area with a
	jigsaw. Check the opening size by inserting the interface
	part way through the hole. If needed, use a saw, file or
	sandpaper to enlarge the hole. Smooth the edges of the
	hole with sandpaper.
5.	Drill 1/4” (6.4 mm) deep, 3/32” (2.38 mm) diameter pilot
	holes in the desk or table at the marked screw locations.
	The holes should be drilled from the underside or inside
	(concealed side) of the furniture, where the interface will
	be located.
6.	Attach the interface to the desk with the provided wood
	screws, as shown in
	this illustration.

TSOOB

OC	EL
LORNT	LVE

KAEP

		X		RTECEN
		AG	XS	GIN
TGV	GAVS		GA
TGV		AVG	M
	220	GVTIIN

				RGB
2			Rxi	202
TUNP		HTIWVTG
1	I
	PDSA

Through-desk mounting

7. To adjust the height of the interface within the desk, slide the interface up or down to the desired position, then tighten the screws that attach the brackets to the interface.

Rack mounting

1.	If feet were installed on the bottom of the interface, remove
	them.
2.	Place the interface on one half of the 1U (one unit high,
	19” wide) optional rack shelf (part #60-190-01). Align the
	front of the interface with the front of the shelf, and align
	the threaded holes on the bottom of the interface with the
	holes in the rack shelf.
3.	Attach the interface to the rack shelf with the two provided
	4-40 x 1/8” machine screws. Insert the screws from the

underside of the shelf, and securely fasten them through diagonally opposite corners as shown in the illustration below.

Use 2 mounting holes on opposite corners

False front panel uses 2 front holes

R	202 Rxi	(2) 4-40 x 1/8" screws
GB
		VTG

Rack mounting

4.	Attach the false front panel (provided with the rack shelf)
	to the unoccupied side of the rack (as shown above), or
	install a second half-rack-width device in that side by
	repeating steps 1 – 3.
5.	Attach the rack shelf to the rack using four 10-32 x ¾” bolts.
	Insert the bolts through #10 beveled washers, then through
	the holes in the rack ears and rack, as shown above.

2-4

RGB 202 Rxi, RGB 202 Rxi VTG • Installation and Operation

2-5

RGB 202 Rxi, RGB 202 Rxi VTG specifications

The Extron RGB 202 Rxi VTG is a highly efficient, versatile video signal processor that offers robust functionality tailored for professional AV applications. This device is designed to handle RGB video and is particularly well-suited for integration into complex AV systems, providing exceptional image quality and ease of use.

One of the standout features of the RGB 202 Rxi is its ability to accommodate multiple video formats, including high-resolution RGBHV, RGBS, and even component video signals. This flexibility makes it an ideal choice for environments where varying sources need to be managed seamlessly. The device can output standard video formats up to 1920x1200, ensuring compatibility with a wide range of display technologies.

In addition to its impressive video handling capabilities, the RGB 202 Rxi incorporates advanced signal processing technologies. The built-in video scaling technology optimizes output resolutions, ensuring that images are displayed clearly and without distortion. This is especially important in environments where image detail is critical, such as in educational institutions, corporate settings, or command and control centers.

Another noteworthy characteristic of the RGB 202 Rxi is its extensive connectivity options. The device features multiple input and output connectors, including RGBHV, RS-232, and composite video, facilitating easy integration into existing systems. The integrated Electra™ technology enhances the unit's signal processing abilities, providing sharp and high-quality outputs regardless of the source material.

User-friendliness is also a key design element of the RGB 202 Rxi. Its intuitive front panel controls and LCD interface simplify operation, while the capability for remote control via RS-232 adds an extra layer of convenience for system operators. Additionally, with Extron’s software, operators can customize settings, manage presets, and monitor the device easily.

Overall, the Extron RGB 202 Rxi VTG represents a powerful solution for professional AV applications that require high-quality RGB video processing. Its combination of advanced technology, versatility, and user-friendly operation makes it a reliable choice for professionals who demand performance and flexibility in their AV systems. Whether in conference rooms or educational settings, this device is designed to meet the needs of dynamic and demanding environments.