HP 20-Feb manual Install the library, Drives. See Removing and Replacing Drive Modules on

4. Install the library.

WARNING The majority of the weight is near the back of the library. Use appropriate force when lifting the library, while ensuring the library remains level to avoid overturning.

Note	To reduce the weight of the library, you can easily remove all the
	drives. See Removing and Replacing Drive Modules on
	page 162 for more information.

2/20 Series Library:

With the help of another person, use the lifting straps built into the sides of the library, and slide the library between the upper and lower sets of mounting rails. Remove the lifting straps once the library is partially installed. Save these straps for future use when moving the library.

Figure 7 Lifting Straps

Chapter 1

Chapter 1 Installing the 2/20, 4/40 & 6/60 Series Libraries into a Rack 23