HP 20-Feb manual Installing the Stop Bracket for the 2/20 Series Library

WARNING Do not move the library without additional help or an appropriately rated lift device. The 2/20 series library weighs 40 kg (87 lb). The 4/40 series library weighs 75 kg (165 lb). The 6/60 series library weighs 104 kg (249 lb).

5.Tighten the screws on the top mounting rail to secure the library.

6.Install the stop bracket to ensure the library is secured inside the rack, and will not come out past the service position (approximately 2/3 of the library is out of the rack).

2/20 Series Library:

a.From the back of the library, unscrew the power supply thumbscrew by hand or with a screwdriver.

b.Install the stop bracket by sliding the edge of the bracket under the thumbscrew and threading the tab through the latch stop.

c.Tighten the power supply thumbscrew to secure the bracket to the library.

Figure 9 Installing the Stop Bracket for the 2/20 Series Library

Chapter 1

Chapter 1 Installing the 2/20, 4/40 & 6/60 Series Libraries into a Rack 25