HP 20-Feb manual Clearance, Square foot Tip rating, Level surface

Table 2	Location Criteria
Clearance	2/20, 4/40, and 6/60 series stand-alone configurations — located on or
	below a table:
	Back:	56 cm (22 in) for cooling and service.
	Front:	86 cm (34 in) for operator access.
	Sides:	56 cm (22 in) for removal of the external cover.
	2/20, 4/40, and 6/60 series rackmounted configurations:
	Back:	61 cm (24 in) minimum to allow adequate room for service
		access.
	Front:	86 cm (34 in) for operator access.
	Sides:	56 cm (22 in) minimum
	Height:	For ease of use and optimum safety, the top of the library
		should be mounted approximately 120 cm (48 in) above the
		floor.
	8/80 and 10/100 series tape libraries
	Back:	56 cm (22 in) minimum
	Front:	191 cm (75 in) minimum
	Sides:	5 cm (2 in) minimum
Floor rating	For 8/80 and 10/100 series tape libraries only.
	A fully loaded library can weigh up to 325 kg (715 lbs). Each caster supports
	up to 96 kg (213 lbs). To support the weight exerted on the floor by the casters,
	the floor rating must meet or exceed 1,694 kg per square meter (347 lbs per
	square foot).
Tip rating	For 8/80 and 10/100 series libraries only.
	Do not tip the library more than 10°. Ensure that the location for the library has
	a level surface.

Chapter 1

Chapter 1 Choosing a Location 15