HP 20-Feb manual Moving Tapes Between Slots, Remote Management Card on

1.From the Drive and Tape Operations menu, select [Clean Drive].

2.From Choose Cleaning Slot, use the [-], [+] or [++] key to select the slot location of the cleaning tape. Refer to the label inside the library drawer, the front panel display, or Library Back Panel Features on page 33 for a list of the slot numbers.

Select [OK].

3.Using the [-]or [+] keys, select the number of the drive to be cleaned. Select [Clean].

When the cleaning process is complete, the cleaning tape will be returned to the original slot location. If the cycle failed, the screen will display the appropriate status information. See Troubleshooting Common Problems on page 140 for possible cleaning problems.

Note	Drives can also be cleaned from remote access. See Using the
	Remote Management Card on page 96.

Moving Tapes Between Slots

Main Menu -> Operations -> Drive and Tape Operations

1.From the Drive and Tape Operations menu, select [Move Tape Slot-to-Slot].

2.Select the slot where you want to move the tape from using the [-], [+] or [++] keys, and press [OK].

3.Select the slot where you want to move the tape to using the [-], [+] or [++] keys, and press [OK]. A message will display if the destination slot chosen is reserved or is the original “home” slot for a tape in the drive.

A status screen indicates the tape is being moved.

88 Drive and Tape Operations Chapter 2