HP 20-Feb manual Library Error Codes, For more information, see Information Needed for Support on

Error Code Reference

C

Library Error Codes

Table 46 on page 210 lists the hard error codes and suggestions for recovery. Use the recovery instructions from the front panel display as the primary approach to troubleshooting. Each hard error is accompanied by a qualifier code and a list of sequence (micro-move) IDs (only used for factory diagnostics).

Note	If you need to contact a service representative to resolve an issue,
	be sure to note the error code and qualifier code beforehand.
	For more information, see Information Needed for Support on
	page 202.

Each hard error code and qualifier code is paired with a list of recovery suggestions. The library suggests the appropriate recovery procedures, which could include:

■Power cycling the library.

■Removing a tape from the drive.

■Checking the library or host configuration.

■Checking the cable connections (data or power).

■Running diagnostic tests. Diagnostic tests are recommended to help isolate the appropriate FRU for replacement, or to clear the error condition.

■Repositioning a tape or magazine.

■Upgrading firmware.

■Replacing a FRU. Replace FRUs in the order listed. Test after each FRU replacement to determine when the error condition is resolved.

Library Error Codes 209