HP 20-Feb manual Tools and Parts

Installing the 2/20, 4/40 & 6/60 Series Libraries into a Rack

The instructions in this section apply to 2/20, 4/40, and 6/60 series libraries mounted in a standard 19-inch rack with a depth between 24 and 34 inches.

Caution Make sure that the rack and all equipment mounted in the rack have a reliable ground connection.

Verify that the total current of the rack components does not exceed the current rating of the power distribution unit or outlet receptacles.

WARNING Do not move the library without additional help or an appropriately rated lift device. The 2/20 series library weighs 40 kg (87 lb). The 4/40 series library weighs 75 kg (165 lb). The 6/60 series library weighs 104 kg (249 lb).

Tools and Parts

Before you begin, ensure that you have the following:

■Phillips #2 screwdriver

■Torx screwdriver with T20 and T25 bits

■1/2-inch open-end wrench

Chapter 1

Chapter 1 Installing the 2/20, 4/40 & 6/60 Series Libraries into a Rack 17