HP 20-Feb manual Choosing a Location, Specifications, refer to Technical Specifications on

Choosing a Location

	Choose a location that meets the criteria listed in Table 2. For additional
	specifications, refer to Technical Specifications on page 181.
Table 2	Location Criteria
Room temperature	10-35º C (50-95º F)
Power source	■ AC power voltage: 100-127 V or 200-240 V
	■ Line frequency: 50-60 Hz
	■ A dedicated circuit is required.
	Caution: The AC power cord is the library’s main AC disconnect device and
	must be easily accessible at all times.
LAN connection	Locate the library near a LAN connection for connecting the RMC (remote
	management card).
Library power	2/20 series	Max: 200W
consumption	4/40 series	Max: 375W
	6/60 series	Max: 560W
	8/80 series	Max: 725W
	10/100 series	Max: 1,200W
Air quality	Minimal sources of particulate contamination. Avoid areas near frequently used
	doors and walkways, stacks of supplies that collect dust, and smoke-filled rooms.
	Caution: Excessive dust and debris can damage tapes and tape drives.
Humidity	20-80% RH

14 Choosing a Location Chapter 1