HP 20-Feb manual Installing a Drive Module

Installing a Drive Module

WARNING It is not necessary to power off the library when inserting a replacement drive module. However, to avoid injury, do not insert your hand or foreign objects through the empty drive bay and into the vertical lift assembly area.

1. Hold the drive module with one hand on the drive module handle while the other hand supports the bottom (Figure 53 on page 165).

2. Install the drive by inserting the rail at the top of the drive module into the

	slot at the top of the drive module opening.
	Note	Higher force will be required in the last half-inch of insertion to
		engage the electrical connection.
Figure 53	Installing a Drive Module

Chapter 5

Chapter 5 Removing and Replacing Drive Modules 165