HP 20-Feb manual Location of Securing Screws, Larger trim brackets

8. Open the tape drawers and tighten the screws to secure the library into place (Figure 14).

— For trim brackets, tighten the existing thumbscrews.

— For flushmount brackets, use two 10-32 x .50 screws.

	Note	The drawers may be key locked. The keys are attached to the
		power supply handle on the back of the library.
Figure 14	Location of Securing Screws

(larger trim brackets) (flush-mount trim brackets)

30 Installing the 2/20, 4/40 & 6/60 Series Libraries into a Rack Chapter 1