HP 20-Feb Getting Started, Software, Configure the library using the remote management card see

Getting Started

After you install and configure the library, you must complete the following setup tasks from the library’s front panel:

■Setting the date and time: When you first set up the library or if it has been unplugged for an extended period of time (around 8 days), set the library’s real-time clock. See Setting the Date and Time on page 108 for more information.

■Setting the mailslot configuration: The default setting is for a one-slot mailslot. You can select a 0-slot, 1-slot, 1-magazine, or 2-magazine mailslot. See Configuring the Mailslot on page 93 for more information.

Note	Mailslot configuration must be set prior to installing the backup
	software.

■Configuring the library for web monitoring: You can monitor and manage your library anywhere on the network through user friendly web pages. See Using the Remote Management Card on page 96 for more information.

■Enabling the password: The library does not have an administrator password enabled when it arrives. To ensure security and to get full use of the remote management card, enable and select a password. Be sure to remember this password. See Enabling and Changing the Password on page 92 for more information.

Note	You must first set a library password through the front panel to
	configure the library using the remote management card (see
	Enabling and Changing the Password on page 92).

Chapter 1

Chapter 1 Getting Started 53