HP 20-Feb manual 0BH, 0CH, 0DH, 0EH, 0FH

Table 46		Error Codes and Recovery Procedures
Decimal	Hex	Description	Recovery Method
Error	Error
11	0BH	Failed plunge motor	■ Note the error code qualifier to help determine
		test.	appropriate testing.
12	0CH	Transport failed to	■ Make sure that all tape cartridges are fully
		find the translate	seated in their slots.
		home position.
13	0DH	Transport failed to	■ Check for a possible obstruction in the
		find the vertical home	transport pathway and remove it.
		position.	■ Verify that the vertical path is physically clear.
			■ Make sure that all tape cartridges are fully
			seated in their slots. (When manually loaded,
			cartridges may not have been fully inserted into
			slots.)
14	0EH	Transport failed to	■ The plunge motor can be moved. Therefore, the
		find the plunge home	motor and umbilical cable are probably not
		position.	indicated.
			■ Replace the transport assembly.
15	0FH	Has wrong library	Download new firmware (see Upgrading Firmware
		family firmware or the	on page 176).
		controller is on the
		wrong level.		Appendix
18	12H	open.	Close magazine doors.
		Failed because
		magazine door) is
				C
19	13H	Vertical motor cable is	Check that the vertical cable connections are
		missing or faulty.	secure.
20	14H	Transport umbilical	Check the transport cable connections or the cable
		cable is missing or	that goes from the transport to the library.
		faulty.

Appendix Library Error Codes 211