HP 20-Feb manual Upper and Lower Rails

3.Align the lower (black/silver) rail with the lower two clip nuts, and loosely install a screw into each clip nut. (See Figure 6.)

a.Slide the rail so that it equals the rack depth, and loosely install the screws.

b.Tighten all screws to secure the rails.

c.Tighten the two pre-installed screws inside each mounting rail to secure the rail in position.

Figure 6 Upper and Lower Rails

20

40

60

22 Installing the 2/20, 4/40 & 6/60 Series Libraries into a Rack Chapter 1