HP 20-Feb manual Configuring the Library, Menu Item Description Default Options, Dhcp

Configuring the Library

Main Menu -> Administration -> Change Configuration

Note	When you reconfigure the library, you may also need to
	reconfigure your backup software. For more information, consult
	the documentation provided with your software.

You can change the following configuration options for the library:

Table 11	Configuration Options
Menu Item	Description	Default	Options
Password	See Enabling and Changing the Password on	Off	On or Off
	page 92.
Network	See Using the Remote Management Card on	DHCP Off	Assign an IP
Access	page 96.		address or use
			DHCP
Mailslot	See Configuring the Mailslot on page 93.	One-slot	0 slots, 1 slot, 1
Configuration			magazine, or 2
			magazines
Fibre Channel	See Configuring the Library for Fibre Channel	N/A	N/A
or SCSI IDs	on page 102 or Setting SCSI IDs on page 106.
Save Element	Allows the host to continue reserving drive or	Off	On or Off
Reserve After	slots after a power cycle (a SCSI element
a Power Cycle	reservation). This is typically used to ensure that
	only one host can access a slot or drive. See
	Configuration Information on page 112.

90 Configuring the Library Chapter 3