HP 20-Feb manual Removing a Drive

5.Lay the connector assembly to the side, allowing the external cables to hang from the connection(s). Do not disconnect external cables from the connector plate.

6.Loosen the top and bottom thumbscrews on the drive module (Figure 52 on page 164).

7.Using the handle that is mounted on the back of the drive module, pull the drive module straight out with one hand while supporting the bottom of the drive module with the other hand.

Caution As the drive module is pulled out, support the bottom of the drive module to avoid dropping or damaging it.

WARNING To avoid injury, do not insert your hand or foreign objects through the empty drive bay and into the vertical lift assembly area.

Figure 52 Removing a Drive

164 Removing and Replacing Drive Modules Chapter 5