HP 20-Feb manual Windows NT

Windows NT

For Windows NT™ operating systems, perform the following operating system configurations:

■Install the appropriate host bus adapter(s)

■Install the corresponding drivers for the interface card(s)

■To verify the hardware installation, look for the library and drives after powering up the host. Go into Settings -> Control Panel -> SCSI Adapter.

■Install the backup software

■Run a test backup to ensure that all components are properly configured.

Windows 2000

For Windows 2000™ operating systems, perform the following operating system configurations:

■Install the appropriate host bus adapter(s)

■Install the corresponding drivers for the interface card(s)

■To verify the hardware installation, look for the library and drives after powering up the host:

—Right click on My Computer

—Select Manage -> System Tools -> Device Manager

—Medium Changer and Tape Drives should be listed

■Install the backup software

■Run a test backup to ensure that all components are properly configured.

Chapter 1

Chapter 1 Verifying the Host Configuration 51