HP 20-Feb manual Identifying Product Components, Callout Component Description Number

Identifying Product Components

The components listed in Table 1 may be supplied with the library, depending on the library configuration.

		Note	Visit http://www.hp.com/go/support for additional information
			on the HP Library & Tape Tools diagnostic utility, backup
			software compatibility information, accessories, and upgrade
			kits.
Table 1
		Accessories
Callout	Component		Description
Number
1	SCSI interface cable(s)		Four-meter SCSI cable(s) with 68-pin high-density connectors.
2	SCSI jumper cable(s)		68-pin VHD (Very High Density) cable that connects the
			library controller or Fibre Channel controller to a drive.
3	Fibre Channel cable(s)		Optical short-wave cable (16 meters) that connects the Fibre
			Channel controller to the host, hub, or switch (for Fibre
			Channel configurations).
4	Label kit		Bar code labels for data and cleaning cartridges, and
			reordering information.
5	Power cord(s)		Localized power cord(s).
6	SCSI terminator(s)		68-pin high-density SCSI terminator (HVDS or LVDS) to
			terminate the SCSI chain.
7	Fibre Channel GBIC		Connects the Fibre Channel cable to the host, hub, or switch
			when necessary.
8	Data cartridge		Data cartridge included for data backup.
9	Cleaning cartridge		Cleaning cartridge used when cleaning a drive.
10	User’s Guide		Printed English user’s guide describing installation,
			operations, and troubleshooting information.

12 Identifying Product Components Chapter 1