HP 20-Feb manual 7AH, 7BH, Unsuccessful Removing and Replacing Cards on, 7EH

Table 46		Error Codes and Recovery Procedures
Decimal	Hex	Description	Recovery Method
Error	Error
111	6fH	Slave controller card	Ensure the slave controller card is installed and fully
		missing or faulty.	seated.
112	70H	Slave board	Retry command.
		command timeout.
113	71H	Slave controller card	Power cycle the library.
		failed self test.
114	72H	Slave controller card	Power cycle the library.
		failed initialization.
118	76H	Slave controller is on	Remove slave controller card from the bottom level
		level 1.	of the library.
120	78H	Library controller	Ensure Fibre Channel card is installed and fully
		unable to	seated.
		communicate with
		Fibre Channel card.
121	79H	Failed to detect all of	Power cycle the library.
		the Fibre Channel
		cards.
122	7AH	Fibre Channel board	Power cycle the library.
		command timeout.
				AppendixC
123	7BH	A Fibre Channel card	Power cycle library and retry. Replace card if
		has failed.	unsuccessful (Removing and Replacing Cards on
			page 160).
126	7EH	More than one Fibre	Remove duplicate Fibre Channel card.
		Channel card is on a
		library level.
130	82H	Library controller	Power cycle the library.
		unable to
		communicate with
		remote management
		card.

Appendix Library Error Codes 217