HP 20-Feb manual Tape that is receiving data from the host

Table 28	Front Panel Diagnostic Tests
	Test	Description
	Wellness Test	Moves a tape from a random slot to an empty
		drive, repeats the process until all drives are full,
		and then returns all tapes to their original slots.
	Rewind Media	Caution: Do not run this test if the drive contains a
		tape that is receiving data from the host.
		Rewinds the tape in the drive.	Chapter4
		running this test. Motion commands may fail if
	Lock Transport	Locks the transport assembly in place to allow for
		shipping the library. Power down the library after
		issued after the transport assembly is locked.
		Note: The transport assembly automatically
		unlocks when library is powered on.
	Unlock Transport	Unlocks the transport assembly without power
		cycling the library. The transport must have already
		been locked to use this test.
		Note: The transport assembly automatically
		unlocks when library is powered on.
	Test Transport	Exercises the infrared communications path
	Comm	between the library controller and the transport
		controller. Reports the health of this link. If the test
		passes, the infrared communication link is good.
	Show All Sensors	Dynamically displays the state of sensors. To toggle
		drawer sensors, open and close the drawers. To
		toggle the mailslot sensor, open the mailslot to
		access the first two tapes.

Chapter 4 Diagnostic Support Tools 157